DOOR LOCK: POWER DOOR LOCK CONTROL SYSTEM: OPERATION CHECK; 2018 - 2024 MY Camry [03/2017

The operation check below is based on the non-customized initial condition of the vehicle.

(a) Check that all of the doors lock when the lock side of the door control switch is pressed.

(b) Check that all of the doors unlock when the unlock side of the door control switch is pressed.

(d) Check that only the driver door unlocks when the driver door lock cylinder is turned to unlock once using the key and all of the doors unlock when it is turned to unlock again.

In order to prevent the key from being locked in the vehicle, the following inspection should be performed with the driver door window open.

(b) With the driver door open, check that all of the doors unlock immediately after the door lock knob for the driver door is pressed.

(c) With the driver door open, check that all of the doors unlock immediately after the lock side of the door control switch is pressed.

(d) With the driver door open, press the driver door lock knob and hold it for 2 seconds or more, then close the driver door and check that all of the doors unlock.

(a) Close all of the doors and leave the driver door window open so that the door control switch can be operated from outside the vehicle. (Step 1)

(b) Open the driver door and remove the key from the vehicle. With the door still open, lock the door using the door lock knob. Close the driver door. Then, check that the doors do not unlock when the unlock side of the door control switch is pressed from outside the vehicle.

(c) Starting from Step 1, with the key outside the vehicle, close and lock the driver door using the mechanical key. Then, check that the doors do not unlock when the unlock side of the door control switch is pressed from outside the vehicle.

(d) Starting from Step 1, with the key outside the vehicle, close and lock the driver door using wireless key operation or smart key operation. Then, check that the doors do not unlock when the unlock side of the door control switch is pressed from outside the vehicle.

Check that the security function of the door lock control system is canceled under the following conditions:

The ignition switch is turned to ON.
The driver door is unlocked using the key.
The unlock side of the door control switch is pressed after the door lock knob is unlocked manually.
The doors are unlocked by wireless operation.
The doors are unlocked by entry operation.*

*: w/ Smart Key System

The key-linked 2-step unlock function can be customized. Make sure that function is ON before this procedure.

(b) Check that only the driver door unlocks when the driver door lock cylinder is turned to unlock once using the key and all of the doors unlock when it is turned to unlock again.

The shift linked automatic door lock function can be customized. Make sure that function is ON before this procedure.

(a) With the shift lever in P and the ignition switch ON, check that all doors lock automatically when the shift lever is moved to any position other than P.

The speed-sensitive automatic door lock function can be customized. Make sure that function is ON before this procedure.

(a) When any door is unlocked and the vehicle is driven at approximately 20 km/h (12 mph) or more, check that all of the doors lock automatically.

The shift linked automatic door unlock function can be customized. Make sure that function is ON before this procedure.

(a) With the shift lever in any position other than P and the ignition switch ON, check that all doors unlock automatically when the shift lever is moved to P.

The driver door-linked automatic door unlock function can be customized. Make sure that function is ON before this procedure.

(a) When the driver door is closed, turning the ignition switch from ON to off and opening the driver door within approximately 43 seconds will automatically unlock all doors.