| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM1000000012W20 |
| Model Year Start: 2018 | Model: Camry | Prod Date Range: [03/2017 - 10/2020] |
| Title: PRE-COLLISION: PRE-COLLISION SYSTEM: C1AA9; Front Camera Module Beam Axis Not Adjusted; 2018 - 2020 MY Camry [03/2017 - 10/2020] | ||
|
DTC |
C1AA9 |
Front Camera Module Beam Axis Not Adjusted |
DESCRIPTION
If forward recognition camera adjustment has not been performed or did not complete normally after the forward recognition camera was replaced with a new one, DTC C1AA9 will be stored.
|
DTC No. |
Detection Item |
DTC Detection Condition |
Trouble Area |
|---|---|---|---|
|
C1AA9 |
Front Camera Module Beam Axis Not Adjusted |
The millimeter wave radar sensor assembly detects that forward recognition camera adjustment has not been completed for 1 second or more. |
Forward recognition camera system |
PROCEDURE
|
1. |
GO TO FORWARD RECOGNITION CAMERA SYSTEM |
HINT:
If DTC C1AA9 is output by the pre-collision system, perform troubleshooting for the forward recognition camera system.
Click here
![2018 - 2020 MY Camry [03/2017 - 10/2020]; CRUISE CONTROL: FORWARD RECOGNITION CAMERA SYSTEM: HOW TO PROCEED WITH TROUBLESHOOTING](/t3Portal/stylegraphics/info.gif)
| NEXT |
|
END |
|
|