| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM1000000012W1C |
| Model Year Start: 2018 | Model: Camry | Prod Date Range: [03/2017 - 10/2020] |
| Title: PRE-COLLISION: PRE-COLLISION SYSTEM: C1A10; Front Radar Sensor; 2018 - 2020 MY Camry [03/2017 - 10/2020] | ||
|
DTC |
C1A10 |
Front Radar Sensor |
DESCRIPTION
When an internal malfunction is detected in the millimeter wave radar sensor assembly, DTC C1A10 is stored.
|
DTC No. |
Detection Item |
DTC Detection Condition |
Trouble Area |
|---|---|---|---|
|
C1A10 |
Front Radar Sensor |
When the ignition switch is ON, the millimeter wave radar sensor assembly detects an internal malfunction for approximately 1 second or more. |
Millimeter wave radar sensor assembly |
CAUTION / NOTICE / HINT
NOTICE:
- When replacing the millimeter wave radar sensor assembly, always replace it with a new one. If a millimeter wave radar sensor assembly which was installed to another vehicle is used, the information stored in the millimeter wave radar sensor assembly will not match the information from the vehicle. As a result, a DTC may be stored.
-
If the millimeter wave radar sensor assembly has been replaced, be sure to perform millimeter wave radar sensor assembly adjustment.
Click here
![2018 MY Camry [03/2017 - 06/2017]; CRUISE CONTROL: MILLIMETER WAVE RADAR SENSOR: ADJUSTMENT](/t3Portal/stylegraphics/info.gif)
PROCEDURE
|
1. |
REPLACE MILLIMETER WAVE RADAR SENSOR ASSEMBLY |
(a) Replace the millimeter wave radar sensor assembly.
Click here
(b) Adjust the millimeter wave radar sensor assembly.
Click here
|
|
2. |
CLEAR DTC (PRE-COLLISION SYSTEM) |
(a) Clear the DTCs.
Body Electrical > Pre-Collision 2 > Clear DTCs
| NEXT |
|
END |
|
|