| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM1000000012VXS |
| Model Year Start: 2018 | Model: Camry | Prod Date Range: [03/2017 - 10/2020] |
| Title: CRUISE CONTROL: MILLIMETER WAVE RADAR SENSOR: INSTALLATION; 2018 - 2020 MY Camry [03/2017 - 10/2020] | ||
INSTALLATION
CAUTION / NOTICE / HINT
NOTICE:
If the millimeter wave radar sensor assembly has been struck or dropped, replace the millimeter wave radar sensor assembly with a new one.
PROCEDURE
1. INSTALL MILLIMETER WAVE RADAR SENSOR ASSEMBLY
(a) Engage the 2 guides.
|
Bolt |
|
Screw |
(b) Tighten the 2 bolts and 2 screws on the millimeter wave radar sensor assembly.
Torque:
Bolt :
2.5 N·m {25 kgf·cm, 22 in·lbf}
HINT:
Tighten the bolts in the order shown in the illustration.
(c) Connect the connector.
2. INSTALL COOL AIR INTAKE DUCT SEAL
Click here
![2018 MY Camry [03/2017 - 06/2017]; EXTERIOR PANELS / TRIM: FRONT BUMPER: INSTALLATION+](/t3Portal/stylegraphics/info.gif)
3. ADJUST MILLIMETER WAVE RADAR SENSOR
(a) When the millimeter wave radar sensor assembly is replaced with a new one, adjustment of the radar sensor beam axis must be performed.
Click here
|
|