Last Modified: 11-20-2023 |
6.11:8.1.0 |
Doc ID: RM1000000012VM9 |
Model Year Start: 2018 |
Model: Camry |
Prod Date Range: [03/2017 - 09/2019] |
Title: CELLULAR COMMUNICATION: SAFETY CONNECT SYSTEM: B15CC; Backup Battery Failure; 2018 - 2019 MY Camry [03/2017 - 09/2019] |
DTC
|
B15CC
|
Backup Battery Failure
|
DESCRIPTION
This DTC is set when the DCM (Telematics Transceiver) detects one of the following:
-
The BUB (Back-Up Battery) voltage drops or the BUB (Back-Up Battery) malfunctions.
-
The BUB (Back-Up Battery) temperature is (temporarily) high.
DTC No.
|
Detection Item
|
DTC Detection Condition
|
Trouble Area
|
B15CC
|
Backup Battery Failure
|
BUB (Back-Up Battery) malfunction
|
-
BUB (Back-Up Battery)
-
DCM (Telematics Transceiver)
|
CAUTION / NOTICE / HINT
HINT:
Before performing this diagnostic procedure, make sure to perform Health Check and confirm that the DCM/VIN registration information is correct.
Click here
PROCEDURE
(a) Turn the engine switch off.
(b) Connect the Techstream to the DLC3.
(c) Turn the engine switch on (IG) and wait for 10 seconds.
(d) Turn the Techstream on.
(e) Clear the DTCs.
Body Electrical > Telematics > Clear DTCs
(f) Recheck for DTCs.
Body Electrical > Telematics > Trouble Codes
Result
|
Proceed to
|
DTC B15CC is output
|
A
|
DTC B15CC is not output
|
B
|
A
|
|
|
2.
|
REPLACE BUB (BACK-UP BATTERY)
|
(a) Replace the BUB (Back-Up Battery) with a known good one and check if the same problem occurs again.
Click here
NOTICE:
The BUB (Back-Up Battery) must not be replaced while an ACN call is in progress.
Click here
NEXT
|
|
|
(a) Clear the DTCs.
Click here
NEXT
|
|
|
(a) Recheck for DTCs and check if the same trouble occurs again.
Click here
OK:
No DTC is output.
OK |
|
END
|
NG
|
|
|
5.
|
REPLACE DCM (TELEMATICS TRANSCEIVER)
|
(a) Replace the DCM (Telematics Transceiver).
Click here
NOTICE:
-
The engine switch must be off.
-
Do not swap the DCM (Telematics Transceiver) with one from another vehicle.
|