| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM1000000012VFG |
| Model Year Start: 2018 | Model: Camry | Prod Date Range: [03/2017 - ] |
| Title: PARK ASSIST / MONITORING: BLIND SPOT MONITOR SYSTEM: C1ABB; Blind Spot Monitor Master Module Beam Axis Inspection Incomplete; 2018 - 2024 MY Camry [03/2017 - ] | ||
|
DTC |
C1ABB |
Blind Spot Monitor Master Module Beam Axis Inspection Incomplete |
DESCRIPTION
This DTC is stored when a beam axis inspection has not been performed for the blind spot monitor sensor RH.
HINT:
This DTC is always stored after replacing a blind spot monitor sensor. The purpose of this DTC is to ensure that a beam axis inspection is performed. Completing the beam axis inspection after replacing a blind spot monitor sensor prevents this DTC from being output.
|
DTC No. |
Detection Item |
DTC Detection Condition |
Trouble Area |
|---|---|---|---|
|
C1ABB |
Blind Spot Monitor Master Module Beam Axis Inspection Incomplete |
A beam axis inspection has not been performed |
Blind spot monitor sensor RH |
PROCEDURE
|
1. |
PROCEED TO TEST MODE (BLIND SPOT MONITOR BEAM AXIS INSPECTION) |
(a) Change the blind spot monitor sensor RH to Test Mode using the Techstream.
HINT:
Refer to Blind Spot Monitor Beam Axis Inspection.
Click here
![2018 MY Camry [03/2017 - 06/2017]; PARK ASSIST / MONITORING: BLIND SPOT MONITOR SYSTEM: OPERATION CHECK](/t3Portal/stylegraphics/info.gif)
| NEXT |
|
END |
|
|