| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM1000000012VFD |
| Model Year Start: 2018 | Model: Camry | Prod Date Range: [03/2017 - 06/2017] |
| Title: PARK ASSIST / MONITORING: BLIND SPOT MONITOR SYSTEM: C1AB6; Blind Spot Monitor Master Module; 2018 MY Camry [03/2017 - 06/2017] | ||
|
DTC |
C1AB6 |
Blind Spot Monitor Master Module |
DESCRIPTION
This DTC is stored when the blind spot monitor sensor RH detects an internal malfunction.
|
DTC No. |
Detection Item |
DTC Detection Condition |
Trouble Area |
|---|---|---|---|
|
C1AB6 |
Blind Spot Monitor Master Module |
The blind spot monitor sensor RH (master) detects an internal malfunction |
Blind spot monitor sensor RH |
CAUTION / NOTICE / HINT
NOTICE:
When checking for DTCs, make sure that the blind spot monitor system is turned on.
PROCEDURE
|
1. |
CHECK DTC |
(a) Turn the ignition switch off.
(b) Turn the ignition switch to ON.
(c) Recheck for DTCs and check if the same DTC is output again.
Body Electrical > Blind Spot Monitor Master > Trouble Codes
OK:
No DTCs are output.
| OK |
|
| NG |
|
|
|