| Last Modified: 09-09-2025 | 6.11:8.1.0 | Doc ID: RM1000000012VCM |
| Model Year Start: 2018 | Model: Camry | Prod Date Range: [03/2017 - ] |
| Title: SUPPLEMENTAL RESTRAINT SYSTEMS: REAR SEAT SIDE AIRBAG ASSEMBLY (for Fold Down Seat Type): ON-VEHICLE INSPECTION; 2018 - 2024 MY Camry [03/2017 - ] | ||
ON-VEHICLE INSPECTION
CAUTION / NOTICE / HINT
CAUTION:
Be sure to correctly follow the removal and installation procedures for the rear seat airbag assemblies.
PROCEDURE
PROCEDURE
1. INSPECT REAR SEAT AIRBAG ASSEMBLY (for Vehicle not Involved in Collision)
(a) Perform a diagnostic system check.
Click here
![2018 - 2024 MY Camry [03/2017 - ]; SUPPLEMENTAL RESTRAINT SYSTEMS: AIRBAG SYSTEM: DTC CHECK / CLEAR](/t3Portal/stylegraphics/info.gif)
(b) Visually check for defects with the rear seat airbag assemblies installed to the vehicle.
HINT:
The defects are as follows:
- Scratches, broken or frayed threads on the surface of the rear side seatback assembly around the rear seat airbag assemblies
- Small cracks in the rear side seatback assembly around the rear seat airbag assemblies
- Significant discoloration on the rear side seatback assembly around the rear seat airbag assemblies
OK:
No defects are found.
If any defects are found, replace the rear side seatback pad or rear side seatback cover sub-assembly with a new one.
2. INSPECT REAR SEAT AIRBAG ASSEMBLY (for Vehicle Involved in Collision and Airbag not Deployed)
(a) Perform a diagnostic system check.
Click here
(b) Visually check for defects with the rear seat airbag assemblies removed from the vehicle.
HINT:
The defects are as follows:
- Scratches, broken or frayed threads on the surface of the base fabric of the rear seat airbag assemblies
- Marks from being dropped
- Deformation of the installation surface of the rear seat airbag assemblies
- Cracks or other damage to the wire harness or connector
OK:
No defects are found.
If any defects are found, replace the rear seat airbag assembly with a new one.
|
|