A25A-FKS (ENGINE CONTROL): AIR FUEL RATIO SENSOR (for Sensor 1): INSTALLATION; 2018 - 2024 MY Camry [03/2017

Last Modified: 11-20-2023	6.11:8.1.0	Doc ID: RM1000000012V82
Model Year Start: 2018	Model: Camry	Prod Date Range: [03/2017 - ]
Title: A25A-FKS (ENGINE CONTROL): AIR FUEL RATIO SENSOR (for Sensor 1): INSTALLATION; 2018 - 2024 MY Camry [03/2017 - ]

INSTALLATION

1. INSTALL AIR FUEL RATIO SENSOR

HINT:

Perform "Inspection After Repair" after replacing the air fuel ratio sensor.

Click here

(a) Using SST, install the air fuel ratio sensor to the exhaust manifold (TWC: Front Catalyst).

SST: 09224-00012

Torque:

Specified tightening torque :

44 N·m {449 kgf·cm, 32 ft·lbf}

NOTICE:

If the air fuel ratio sensor has been struck or dropped, replace it.

HINT:

Calculate the torque wrench reading when changing the fulcrum length of the torque wrench.
Click here
When using SST (fulcrum length of 30 mm (1.18 in.)) + torque wrench (fulcrum length of 180 mm (7.09 in.)):
37.7 N*m (384 kgf*cm, 28 ft.*lbf)

*a	Torque Wrench Fulcrum Length

(b) Connect the air fuel ratio sensor connector.

*a	Tie Band
*b	Wire Harness Clamp

2. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY

Click here

3. INSPECT FOR EXHAUST GAS LEAK

Click here

4. PERFORM INITIALIZATION

(a) Perform "Inspection After Repair" after replacing the air fuel ratio sensor.

Click here