| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM1000000012UWK |
| Model Year Start: 2018 | Model: Camry | Prod Date Range: [03/2017 - ] |
| Title: WINDOW / GLASS: POWER WINDOW CONTROL SYSTEM: TERMINALS OF ECU; 2018 - 2024 MY Camry [03/2017 - ] | ||
TERMINALS OF ECU
CHECK MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY
(a) Disconnect the O2 multiplex network master switch assembly connector.
(b) Measure the voltage and resistance according to the value(s) in the table below.
HINT:
Measure the values on the wire harness side with the connector disconnected.
|
Terminal No. (Symbol) |
Wiring Color |
Terminal Description |
Condition |
Specified Condition |
|---|---|---|---|---|
|
O2-11 (B) - O2-12 (GND) |
LA-R - W-B |
Power supply |
Always |
11 to 14 V |
|
O2-12 (GND) - Body ground |
W-B - Body ground |
Ground |
Always |
Below 1 Ω |
(c) Reconnect the O2 multiplex network master switch assembly connector.
(d) Measure the voltage according to the value(s) in the table below.
|
Terminal No. (Symbol) |
Wiring Color |
Terminal Description |
Condition |
Specified Condition |
|---|---|---|---|---|
|
O2-15 (DOWN) - O2-12 (GND) |
LA-V - W-B |
Power window motor DOWN output |
Ignition switch ON, driver door power window regulator switch not pushed or not pulled |
11 to 14 V |
|
O2-15 (DOWN) - O2-12 (GND) |
LA-V - W-B |
Power window motor DOWN output |
Ignition switch ON, driver door power window moving, driver door power window regulator switch pushed halfway down (Manual operation) |
Below 1 V |
|
O2-20 (UP) - O2-12 (GND) |
LA-L - W-B |
Power window motor UP output |
Ignition switch ON, driver door power window regulator switch not pushed or not pulled |
11 to 14 V |
|
O2-20 (UP) - O2-12 (GND) |
LA-L - W-B |
Power window motor UP output |
Ignition switch ON, driver door power window moving, driver door power window regulator switch pulled halfway up (Manual operation) |
Below 1 V |
CHECK POWER WINDOW REGULATOR SWITCH ASSEMBLY
(a) Disconnect the N3 power window regulator switch assembly connector.
(b) Measure the resistance according to the value(s) in the table below.
HINT:
Measure the values on the wire harness side with the connector disconnected.
|
Terminal No. (Symbol) |
Wiring Color |
Terminal Description |
Condition |
Specified Condition |
|---|---|---|---|---|
|
N3-7 (GND) - Body ground |
W-B - Body ground |
Ground |
Always |
Below 1 Ω |
(c) Reconnect the N3 power window regulator switch assembly connector.
(d) Measure the voltage according to the value(s) in the table below.
|
Terminal No. (Symbol) |
Wiring Color |
Terminal Description |
Condition |
Specified Condition |
|---|---|---|---|---|
|
N3-2 (LED) - N3-7 (GND) |
GR - W-B |
LED illumination signal |
Headlight dimmer switch is in the tail position |
11 to 14 V |
|
N3-2 (LED) - N3-7 (GND) |
GR - W-B |
LED illumination signal |
Headlight dimmer switch is not in the tail position |
Below 1 V |
|
N3-5 (UP) - N3-7 (GND) |
LA-W - W-B |
Power window motor UP output |
Ignition switch ON, power window regulator switch assembly not pushed or not pulled |
11 to 14 V |
|
N3-5 (UP) - N3-7 (GND) |
LA-W - W-B |
Power window motor UP output |
Ignition switch ON, front passenger door power window moving, power window regulator switch assembly pulled halfway up (Manual operation) |
Below 1 V |
|
N3-5 (UP) - N3-7 (GND) |
LA-W - W-B |
Power window motor UP output |
Ignition switch ON, front passenger door power window fully open |
11 to 14 V |
|
N3-5 (UP) - N3-7 (GND) |
LA-W - W-B |
Power window motor UP output |
Ignition switch ON, front passenger door power window moving, power window regulator switch assembly fully pulled up (Auto operation) |
Below 1 V |
|
N3-5 (UP) - N3-7 (GND) |
LA-W - W-B |
Power window motor UP output |
Ignition switch ON, front passenger door power window fully closed |
11 to 14 V |
|
N3-4 (DOWN) - N3-7 (GND) |
LA-R - W-B |
Power window motor DOWN output |
Ignition switch ON, power window regulator switch assembly not pushed or not pulled |
11 to 14 V |
|
N3-4 (DOWN) - N3-7 (GND) |
LA-R - W-B |
Power window motor DOWN output |
Ignition switch ON, front passenger door power window moving, power window regulator switch assembly pushed halfway down (Manual operation) |
Below 1 V |
|
N3-4 (DOWN) - N3-7 (GND) |
LA-R - W-B |
Power window motor DOWN output |
Ignition switch ON, front passenger door power window fully closed |
11 to 14 V |
|
N3-4 (DOWN) - N3-7 (GND) |
LA-R - W-B |
Power window motor DOWN output |
Ignition switch ON, front passenger door power window moving, power window regulator switch assembly fully pushed down (Auto operation) |
Below 1 V |
|
N3-4 (DOWN) - N3-7 (GND) |
LA-R - W-B |
Power window motor DOWN output |
Ignition switch ON, front passenger door power window fully open |
11 to 14 V |
|
N3-8 (AUTO) - N3-7 (GND) |
LA-G - W-B |
Power window motor AUTO UP output |
Ignition switch ON, front passenger door power window fully open |
11 to 14 V |
|
N3-8 (AUTO) - N3-7 (GND) |
LA-G - W-B |
Power window motor AUTO UP output |
Ignition switch ON, front passenger door power window moving, power window regulator switch assembly fully pulled up (Auto operation) |
Below 1 V |
|
N3-8 (AUTO) - N3-7 (GND) |
LA-G - W-B |
Power window motor AUTO UP output |
Ignition switch ON, front passenger door power window fully closed |
11 to 14 V |
|
N3-8 (AUTO) - N3-7 (GND) |
LA-G - W-B |
Power window motor AUTO DOWN output |
Ignition switch ON, front passenger door power window fully closed |
11 to 14 V |
|
N3-8 (AUTO) - N3-7 (GND) |
LA-G - W-B |
Power window motor AUTO DOWN output |
Ignition switch ON, front passenger door power window moving, power window regulator switch assembly fully pushed down (Auto operation) |
Below 1 V |
|
N3-8 (AUTO) - N3-7 (GND) |
LA-G - W-B |
Power window motor AUTO DOWN output |
Ignition switch ON, front passenger door power window fully open |
11 to 14 V |
CHECK REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY (FOR LH DOOR)
(a) Disconnect the Q2 rear power window regulator switch assembly (for LH door) connector.
(b) Measure the resistance according to the value(s) in the table below.
HINT:
Measure the values on the wire harness side with the connector disconnected.
|
Terminal No. (Symbol) |
Wiring Color |
Terminal Description |
Condition |
Specified Condition |
|---|---|---|---|---|
|
Q2-7 (GND) - Body ground |
W-B - Body ground |
Ground |
Always |
Below 1 Ω |
(c) Reconnect the Q2 rear power window regulator switch assembly (for LH door) connector.
(d) Measure the voltage according to the value(s) in the table below.
|
Terminal No. (Symbol) |
Wiring Color |
Terminal Description |
Condition |
Specified Condition |
|---|---|---|---|---|
|
Q2-2 (LED) - Q2-7 (GND) |
LG - W-B |
LED illumination signal |
Headlight dimmer switch is in the tail position |
11 to 14 V |
|
Q2-2 (LED) - Q2-7 (GND) |
LG - W-B |
LED illumination signal |
Headlight dimmer switch is not in the tail position |
Below 1 V |
|
Q2-5 (UP) - Q2-7 (GND) |
LA-B - W-B |
Power window motor UP output |
Ignition switch ON, rear power window regulator switch assembly (for LH door) not pushed or not pulled |
11 to 14 V |
|
Q2-5 (UP) - Q2-7 (GND) |
LA-B - W-B |
Power window motor UP output |
Ignition switch ON, rear LH door power window moving, rear power window regulator switch assembly (for LH door) pulled halfway up (Manual operation) |
Below 1 V |
|
Q2-5 (UP) - Q2-7 (GND) |
LA-B - W-B |
Power window motor UP output |
Ignition switch ON, rear LH door power window fully open |
11 to 14 V |
|
Q2-5 (UP) - Q2-7 (GND) |
LA-B - W-B |
Power window motor UP output |
Ignition switch ON, rear LH door power window moving, rear power window regulator switch assembly (for LH door) fully pulled up (Auto operation) |
Below 1 V |
|
Q2-5 (UP) - Q2-7 (GND) |
LA-B - W-B |
Power window motor UP output |
Ignition switch ON, rear LH door power window fully closed |
11 to 14 V |
|
Q2-4 (DOWN) - Q2-7 (GND) |
LA-R - W-B |
Power window motor DOWN output |
Ignition switch ON, rear power window regulator switch assembly (for LH door) not pushed or not pulled |
11 to 14 V |
|
Q2-4 (DOWN) - Q2-7 (GND) |
LA-R - W-B |
Power window motor DOWN output |
Ignition switch ON, rear LH door power window moving, rear power window regulator switch assembly (for LH door) pushed halfway down (Manual operation) |
Below 1 V |
|
Q2-4 (DOWN) - Q2-7 (GND) |
LA-R - W-B |
Power window motor DOWN output |
Ignition switch ON, rear LH door power window fully closed |
11 to 14 V |
|
Q2-4 (DOWN) - Q2-7 (GND) |
LA-R - W-B |
Power window motor DOWN output |
Ignition switch ON, rear LH door power window moving, rear power window regulator switch assembly (for LH door) fully pushed down (Auto operation) |
Below 1 V |
|
Q2-4 (DOWN) - Q2-7 (GND) |
LA-R - W-B |
Power window motor DOWN output |
Ignition switch ON, rear LH door power window fully open |
11 to 14 V |
|
Q2-8 (AUTO) - Q2-7 (GND) |
LA-GR - W-B |
Power window motor AUTO UP output |
Ignition switch ON, rear LH door power window fully open |
11 to 14 V |
|
Q2-8 (AUTO) - Q2-7 (GND) |
LA-GR - W-B |
Power window motor AUTO UP output |
Ignition switch ON, rear LH door power window moving, rear power window regulator switch assembly (for LH door) fully pulled up (Auto operation) |
Below 1 V |
|
Q2-8 (AUTO) - Q2-7 (GND) |
LA-GR - W-B |
Power window motor AUTO UP output |
Ignition switch ON, rear LH door power window fully closed |
11 to 14 V |
|
Q2-8 (AUTO) - Q2-7 (GND) |
LA-GR - W-B |
Power window motor AUTO DOWN output |
Ignition switch ON, rear LH door power window fully closed |
11 to 14 V |
|
Q2-8 (AUTO) - Q2-7 (GND) |
LA-GR - W-B |
Power window motor AUTO DOWN output |
Ignition switch ON, rear LH door power window moving, rear power window regulator switch assembly (for LH door) fully pushed down (Auto operation) |
Below 1 V |
|
Q2-8 (AUTO) - Q2-7 (GND) |
LA-GR - W-B |
Power window motor AUTO DOWN output |
Ignition switch ON, rear LH door power window fully open |
11 to 14 V |
CHECK REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY (FOR RH DOOR)
(a) Disconnect the P2 rear power window regulator switch assembly (for RH door) connector.
(b) Measure the resistance according to the value(s) in the table below.
HINT:
Measure the values on the wire harness side with the connector disconnected.
|
Terminal No. (Symbol) |
Wiring Color |
Terminal Description |
Condition |
Specified Condition |
|---|---|---|---|---|
|
P2-7 (GND) - Body ground |
W-B - Body ground |
Ground |
Always |
Below 1 Ω |
(c) Reconnect the P2 rear power window regulator switch assembly (for RH door) connector.
(d) Measure the voltage according to the value(s) in the table below.
|
Terminal No. (Symbol) |
Wiring Color |
Terminal Description |
Condition |
Specified Condition |
|---|---|---|---|---|
|
P2-2 (LED) - P2-7 (GND) |
LG - W-B |
LED illumination signal |
Headlight dimmer switch is in the tail position |
11 to 14 V |
|
P2-2 (LED) - P2-7 (GND) |
LG - W-B |
LED illumination signal |
Headlight dimmer switch is not in the tail position |
Below 1 V |
|
P2-5 (UP) - P2-7 (GND) |
LA-B - W-B |
Power window motor UP output |
Ignition switch ON, rear power window regulator switch assembly (for RH door) not pushed or not pulled |
11 to 14 V |
|
P2-5 (UP) - P2-7 (GND) |
LA-B - W-B |
Power window motor UP output |
Ignition switch ON, rear RH door power window moving, rear power window regulator switch assembly (for RH door) pulled halfway up (Manual operation) |
Below 1 V |
|
P2-5 (UP) - P2-7 (GND) |
LA-B - W-B |
Power window motor UP output |
Ignition switch ON, rear RH door power window fully open |
11 to 14 V |
|
P2-5 (UP) - P2-7 (GND) |
LA-B - W-B |
Power window motor UP output |
Ignition switch ON, rear RH door power window moving, rear power window regulator switch assembly (for RH door) fully pulled up (Auto operation) |
Below 1 V |
|
P2-5 (UP) - P2-7 (GND) |
LA-B - W-B |
Power window motor UP output |
Ignition switch ON, rear RH door power window fully closed |
11 to 14 V |
|
P2-4 (DOWN) - P2-7 (GND) |
LA-R - W-B |
Power window motor DOWN output |
Ignition switch ON, rear power window regulator switch assembly (for RH door) not pushed or not pulled |
11 to 14 V |
|
P2-4 (DOWN) - P2-7 (GND) |
LA-R - W-B |
Power window motor DOWN output |
Ignition switch ON, rear RH door power window moving, rear power window regulator switch assembly (for RH door) pushed halfway down (Manual operation) |
Below 1 V |
|
P2-4 (DOWN) - P2-7 (GND) |
LA-R - W-B |
Power window motor DOWN output |
Ignition switch ON, rear RH door power window fully closed |
11 to 14 V |
|
P2-4 (DOWN) - P2-7 (GND) |
LA-R - W-B |
Power window motor DOWN output |
Ignition switch ON, rear RH door power window moving, rear power window regulator switch assembly (for RH door) fully pushed down (Auto operation) |
Below 1 V |
|
P2-4 (DOWN) - P2-7 (GND) |
LA-R - W-B |
Power window motor DOWN output |
Ignition switch ON, rear RH door power window fully open |
11 to 14 V |
|
P2-8 (AUTO) - P2-7 (GND) |
LA-GR - W-B |
Power window motor AUTO UP output |
Ignition switch ON, rear RH door power window fully open |
11 to 14 V |
|
P2-8 (AUTO) - P2-7 (GND) |
LA-GR - W-B |
Power window motor AUTO UP output |
Ignition switch ON, rear RH door power window moving, rear power window regulator switch assembly (for RH door) fully pulled up (Auto operation) |
Below 1 V |
|
P2-8 (AUTO) - P2-7 (GND) |
LA-GR - W-B |
Power window motor AUTO UP output |
Ignition switch ON, rear RH door power window fully closed |
11 to 14 V |
|
P2-8 (AUTO) - P2-7 (GND) |
LA-GR - W-B |
Power window motor AUTO DOWN output |
Ignition switch ON, rear RH door power window fully closed |
11 to 14 V |
|
P2-8 (AUTO) - P2-7 (GND) |
LA-GR - W-B |
Power window motor AUTO DOWN output |
Ignition switch ON, rear RH door power window moving, rear power window regulator switch assembly (for RH door) fully pushed down (Auto operation) |
Below 1 V |
|
P2-8 (AUTO) - P2-7 (GND) |
LA-GR - W-B |
Power window motor AUTO DOWN output |
Ignition switch ON, rear RH door power window fully open |
11 to 14 V |
CHECK POWER WINDOW REGULATOR MOTOR ASSEMBLY (FOR DRIVER DOOR)
(a) Disconnect the O6 power window regulator motor assembly (for driver door) connector.
(b) Measure the voltage and resistance according to the value(s) in the table below.
HINT:
Measure the values on the wire harness side with the connector disconnected.
|
Terminal No. (Symbol) |
Wiring Color |
Terminal Description |
Condition |
Specified Condition |
|---|---|---|---|---|
|
O6-1 (GND) - Body ground |
W-B - Body ground |
Ground |
Always |
Below 1 Ω |
|
O6-2 (B) - Body ground |
GR - Body ground |
Power supply |
Always |
11 to 14 V |
(c) Reconnect the O6 power window regulator motor assembly (for driver door) connector.
(d) Measure the voltage according to the value(s) in the table below.
|
Terminal No. (Symbol) |
Wiring Color |
Terminal Description |
Condition |
Specified Condition |
|---|---|---|---|---|
|
O6-7 (DOWN) - O6-1 (GND) |
LA-V - W-B |
Power window motor DOWN input |
Ignition switch ON, multiplex network master switch assembly (driver door power window regulator switch) not pushed or not pulled |
11 to 14 V |
|
O6-7 (DOWN) - O6-1 (GND) |
LA-V - W-B |
Power window motor DOWN input |
Ignition switch ON, driver door power window moving, multiplex network master switch assembly (driver door power window regulator switch) pushed halfway down (Manual operation) |
Below 1 V |
|
O6-7 (DOWN) - O6-1 (GND) |
LA-V - W-B |
Power window motor DOWN input |
Ignition switch ON, driver door power window fully closed |
11 to 14 V |
|
O6-7 (DOWN) - O6-1 (GND) |
LA-V - W-B |
Power window motor DOWN input |
Ignition switch ON, driver door power window moving, multiplex network master switch assembly (driver door power window regulator switch) fully pushed down (Auto operation) |
Below 1 V |
|
O6-7 (DOWN) - O6-1 (GND) |
LA-V - W-B |
Power window motor DOWN input |
Ignition switch ON, driver door power window fully open |
11 to 14 V |
|
O6-10 (UP) - O6-1 (GND) |
LA-L - W-B |
Power window motor UP input |
Ignition switch ON, multiplex network master switch assembly (driver door power window regulator switch) not pushed or not pulled |
11 to 14 V |
|
O6-10 (UP) - O6-1 (GND) |
LA-L - W-B |
Power window motor UP input |
Ignition switch ON, driver door power window moving, multiplex network master switch assembly (driver door power window regulator switch) pulled halfway up (Manual operation) |
Below 1 V |
|
O6-10 (UP) - O6-1 (GND) |
LA-L - W-B |
Power window motor UP input |
Ignition switch ON, multiplex network master switch assembly (driver door power window regulator switch) fully open |
11 to 14 V |
|
O6-10 (UP) - O6-1 (GND) |
LA-L - W-B |
Power window motor UP input |
Ignition switch ON, driver door power window moving, multiplex network master switch assembly (driver door power window regulator switch) fully pulled up (Auto operation) |
Below 1 V |
|
O6-10 (UP) - O6-1 (GND) |
LA-L - W-B |
Power window motor UP input |
Ignition switch ON, driver door power window fully closed |
11 to 14 V |
CHECK POWER WINDOW REGULATOR MOTOR ASSEMBLY (FOR FRONT PASSENGER DOOR)
(a) Disconnect the N7 power window regulator motor assembly (for front passenger door) connector.
(b) Measure the voltage and resistance according to the value(s) in the table below.
HINT:
Measure the values on the wire harness side with the connector disconnected.
|
Terminal No. (Symbol) |
Wiring Color |
Terminal Description |
Condition |
Specified Condition |
|---|---|---|---|---|
|
N7-1 (GND) - Body ground |
W-B - Body ground |
Ground |
Always |
Below 1 Ω |
|
N7-2 (B) - Body ground |
GR - Body ground |
Power supply |
Always |
11 to 14 V |
(c) Reconnect the N7 power window regulator motor assembly (for front passenger door) connector.
(d) Measure the voltage according to the value(s) in the table below.
|
Terminal No. (Symbol) |
Wiring Color |
Terminal Description |
Condition |
Specified Condition |
|---|---|---|---|---|
|
N7-4 (AUTO) - N7-1 (GND) |
LA-G - W-B |
Power window motor AUTO UP input |
Ignition switch ON, front passenger door power window fully open |
11 to 14 V |
|
N7-4 (AUTO) - N7-1 (GND) |
LA-G - W-B |
Power window motor AUTO UP input |
Ignition switch ON, front passenger door power window moving, power window regulator switch assembly fully pulled up (Auto operation) |
Below 1 V |
|
N7-4 (AUTO) - N7-1 (GND) |
LA-G - W-B |
Power window motor AUTO UP input |
Ignition switch ON, front passenger door power window fully closed |
11 to 14 V |
|
N7-4 (AUTO) - N7-1 (GND) |
LA-G - W-B |
Power window motor AUTO DOWN input |
Ignition switch ON, front passenger door power window fully closed |
11 to 14 V |
|
N7-4 (AUTO) - N7-1 (GND) |
LA-G - W-B |
Power window motor AUTO DOWN input |
Ignition switch ON, front passenger door power window moving, power window regulator switch assembly fully pushed down (Auto operation) |
Below 1 V |
|
N7-4 (AUTO) - N7-1 (GND) |
LA-G - W-B |
Power window motor AUTO DOWN input |
Ignition switch ON, front passenger door power window fully open |
11 to 14 V |
|
N7-5 (LED) - N7-1 (GND) |
GR - W-B |
LED illumination signal |
Headlight dimmer switch is in the tail position |
11 to 14 V |
|
N7-5 (LED) - N7-1 (GND) |
GR - W-B |
LED illumination signal |
Headlight dimmer switch is not in the tail position |
Below 1 V |
|
N7-7 (DOWN) - N7-1 (GND) |
LA-R - W-B |
Power window motor DOWN input |
Ignition switch ON, power window regulator switch assembly not pushed or not pulled |
11 to 14 V |
|
N7-7 (DOWN) - N7-1 (GND) |
LA-R - W-B |
Power window motor DOWN input |
Ignition switch ON, front passenger door power window moving, power window regulator switch assembly pushed halfway down (Manual operation) |
Below 1 V |
|
N7-7 (DOWN) - N7-1 (GND) |
LA-R - W-B |
Power window motor DOWN input |
Ignition switch ON, front passenger door power window fully closed |
11 to 14 V |
|
N7-7 (DOWN) - N7-1 (GND) |
LA-R - W-B |
Power window motor DOWN input |
Ignition switch ON, front passenger door power window moving, power window regulator switch assembly fully pushed down (Auto operation) |
Below 1 V |
|
N7-7 (DOWN) - N7-1 (GND) |
LA-R - W-B |
Power window motor DOWN input |
Ignition switch ON, front passenger door power window fully open |
11 to 14 V |
|
N7-10 (UP) - N7-1 (GND) |
LA-W - W-B |
Power window motor UP input |
Ignition switch ON, power window regulator switch assembly not pushed or not pulled |
11 to 14 V |
|
N7-10 (UP) - N7-1 (GND) |
LA-W - W-B |
Power window motor UP input |
Ignition switch ON, front passenger door power window moving, power window regulator switch assembly pulled halfway up (Manual operation) |
Below 1 V |
|
N7-10 (UP) - N7-1 (GND) |
LA-W - W-B |
Power window motor UP input |
Ignition switch ON, front passenger door power window fully open |
11 to 14 V |
|
N7-10 (UP) - N7-1 (GND) |
LA-W - W-B |
Power window motor UP input |
Ignition switch ON, front passenger door power window moving, power window regulator switch assembly fully pulled up (Auto operation) |
Below 1 V |
|
N7-10 (UP) - N7-1 (GND) |
LA-W - W-B |
Power window motor UP input |
Ignition switch ON, front passenger door power window fully closed |
11 to 14 V |
CHECK POWER WINDOW REGULATOR MOTOR ASSEMBLY (FOR REAR LH DOOR)
(a) Disconnect the Q6 power window regulator motor assembly (for rear LH door) connector.
(b) Measure the voltage and resistance according to the value(s) in the table below.
HINT:
Measure the values on the wire harness side with the connector disconnected.
|
Terminal No. (Symbol) |
Wiring Color |
Terminal Description |
Condition |
Specified Condition |
|---|---|---|---|---|
|
Q6-1 (GND) - Body ground |
W-B - Body ground |
Ground |
Always |
Below 1 Ω |
|
Q6-2 (B) - Body ground |
B - Body ground |
Power supply |
Always |
11 to 14 V |
(c) Reconnect the Q6 power window regulator motor assembly (for rear LH door) connector.
(d) Measure the voltage according to the value(s) in the table below.
|
Terminal No. (Symbol) |
Wiring Color |
Terminal Description |
Condition |
Specified Condition |
|---|---|---|---|---|
|
Q6-4 (AUTO) - Q6-1 (GND) |
LA-GR - W-B |
Power window motor AUTO UP input |
Ignition switch ON, rear LH door power window fully open |
11 to 14 V |
|
Q6-4 (AUTO) - Q6-1 (GND) |
LA-GR - W-B |
Power window motor AUTO UP input |
Ignition switch ON, rear LH door power window moving, rear power window regulator switch assembly (for LH door) fully pulled up (Auto operation) |
Below 1 V |
|
Q6-4 (AUTO) - Q6-1 (GND) |
LA-GR - W-B |
Power window motor AUTO UP input |
Ignition switch ON, rear LH door power window fully closed |
11 to 14 V |
|
Q6-4 (AUTO) - Q6-1 (GND) |
LA-GR - W-B |
Power window motor AUTO DOWN input |
Ignition switch ON, rear LH door power window fully closed |
11 to 14 V |
|
Q6-4 (AUTO) - Q6-1 (GND) |
LA-GR - W-B |
Power window motor AUTO DOWN input |
Ignition switch ON, rear LH door power window moving, rear power window regulator switch assembly (for LH door) fully pushed down (Auto operation) |
Below 1 V |
|
Q6-4 (AUTO) - Q6-1 (GND) |
LA-GR - W-B |
Power window motor AUTO DOWN input |
Ignition switch ON, rear LH door power window fully open |
11 to 14 V |
|
Q6-5 (LED) - Q6-1 (GND) |
LG - W-B |
LED illumination signal |
Headlight dimmer switch is in the tail position |
11 to 14 V |
|
Q6-5 (LED) - Q6-1 (GND) |
LG - W-B |
LED illumination signal |
Headlight dimmer switch is not in the tail position |
Below 1 V |
|
Q6-7 (DOWN) - Q6-1 (GND) |
LA-R - W-B |
Power window motor DOWN input |
Ignition switch ON, rear power window regulator switch assembly (for LH door) not pushed or not pulled |
11 to 14 V |
|
Q6-7 (DOWN) - Q6-1 (GND) |
LA-R - W-B |
Power window motor DOWN input |
Ignition switch ON, rear LH door power window moving, rear power window regulator switch assembly (for LH door) pushed halfway down (Manual operation) |
Below 1 V |
|
Q6-7 (DOWN) - Q6-1 (GND) |
LA-R - W-B |
Power window motor DOWN input |
Ignition switch ON, rear LH door power window fully closed |
11 to 14 V |
|
Q6-7 (DOWN) - Q6-1 (GND) |
LA-R - W-B |
Power window motor DOWN input |
Ignition switch ON, rear LH door power window moving, rear power window regulator switch assembly (for LH door) fully pushed down (Auto operation) |
Below 1 V |
|
Q6-7 (DOWN) - Q6-1 (GND) |
LA-R - W-B |
Power window motor DOWN input |
Ignition switch ON, rear LH door power window fully open |
11 to 14 V |
|
Q6-10 (UP) - Q6-1 (GND) |
LA-B - W-B |
Power window motor UP input |
Ignition switch ON, rear power window regulator switch assembly (for LH door) not pushed or not pulled |
11 to 14 V |
|
Q6-10 (UP) - Q6-1 (GND) |
LA-B - W-B |
Power window motor UP input |
Ignition switch ON, rear LH door power window moving, rear power window regulator switch assembly (for LH door) pulled halfway up (Manual operation) |
Below 1 V |
|
Q6-10 (UP) - Q6-1 (GND) |
LA-B - W-B |
Power window motor UP input |
Ignition switch ON, rear LH door power window fully open |
11 to 14 V |
|
Q6-10 (UP) - Q6-1 (GND) |
LA-B - W-B |
Power window motor UP input |
Ignition switch ON, rear LH door power window moving, rear power window regulator switch assembly (for LH door) fully pulled up (Auto operation) |
Below 1 V |
|
Q6-10 (UP) - Q6-1 (GND) |
LA-B - W-B |
Power window motor UP input |
Ignition switch ON, rear LH door power window fully closed |
11 to 14 V |
CHECK POWER WINDOW REGULATOR MOTOR ASSEMBLY (FOR REAR RH DOOR)
(a) Disconnect the P6 power window regulator motor assembly (for rear RH door) connector.
(b) Measure the voltage and resistance according to the value(s) in the table below.
HINT:
Measure the values on the wire harness side with the connector disconnected.
|
Terminal No. (Symbol) |
Wiring Color |
Terminal Description |
Condition |
Specified Condition |
|---|---|---|---|---|
|
P6-1 (GND) - Body ground |
W-B - Body ground |
Ground |
Always |
Below 1 Ω |
|
P6-2 (B) - Body ground |
B - Body ground |
Power supply |
Always |
11 to 14 V |
(c) Reconnect the P6 power window regulator motor assembly (for rear RH door) connector.
(d) Measure the voltage according to the value(s) in the table below.
|
Terminal No. (Symbol) |
Wiring Color |
Terminal Description |
Condition |
Specified Condition |
|---|---|---|---|---|
|
P6-4 (AUTO) - P6-1 (GND) |
LA-GR - W-B |
Power window motor AUTO UP input |
Ignition switch ON, rear RH door power window fully open |
11 to 14 V |
|
P6-4 (AUTO) - P6-1 (GND) |
LA-GR - W-B |
Power window motor AUTO UP input |
Ignition switch ON, rear RH door power window moving, rear power window regulator switch assembly (for RH door) fully pulled up (Auto operation) |
Below 1 V |
|
P6-4 (AUTO) - P6-1 (GND) |
LA-GR - W-B |
Power window motor AUTO UP input |
Ignition switch ON, rear RH door power window fully closed |
11 to 14 V |
|
P6-4 (AUTO) - P6-1 (GND) |
LA-GR - W-B |
Power window motor AUTO DOWN input |
Ignition switch ON, rear RH door power window fully closed |
11 to 14 V |
|
P6-4 (AUTO) - P6-1 (GND) |
LA-GR - W-B |
Power window motor AUTO DOWN input |
Ignition switch ON, rear RH door power window moving, rear power window regulator switch assembly (for RH door) fully pushed down (Auto operation) |
Below 1 V |
|
P6-4 (AUTO) - P6-1 (GND) |
LA-GR - W-B |
Power window motor AUTO DOWN input |
Ignition switch ON, rear RH door power window fully open |
11 to 14 V |
|
P6-5 (LED) - P6-1 (GND) |
LG - W-B |
LED illumination signal |
Headlight dimmer switch is in the tail position |
11 to 14 V |
|
P6-5 (LED) - P6-1 (GND) |
LG - W-B |
LED illumination signal |
Headlight dimmer switch is not in the tail position |
Below 1 V |
|
P6-7 (DOWN) - P6-1 (GND) |
LA-R - W-B |
Power window motor DOWN input |
Ignition switch ON, rear power window regulator switch assembly (for RH door) not pushed or not pulled |
11 to 14 V |
|
P6-7 (DOWN) - P6-1 (GND) |
LA-R - W-B |
Power window motor DOWN input |
Ignition switch ON, rear RH door power window moving, rear power window regulator switch assembly (for RH door) pushed halfway down (Manual operation) |
Below 1 V |
|
P6-7 (DOWN) - P6-1 (GND) |
LA-R - W-B |
Power window motor DOWN input |
Ignition switch ON, rear RH door power window fully closed |
11 to 14 V |
|
P6-7 (DOWN) - P6-1 (GND) |
LA-R - W-B |
Power window motor DOWN input |
Ignition switch ON, rear RH door power window moving, rear power window regulator switch assembly (for RH door) fully pushed down (Auto operation) |
Below 1 V |
|
P6-7 (DOWN) - P6-1 (GND) |
LA-R - W-B |
Power window motor DOWN input |
Ignition switch ON, rear RH door power window fully open |
11 to 14 V |
|
P6-10 (UP) - P6-1 (GND) |
LA-B - W-B |
Power window motor UP input |
Ignition switch ON, rear power window regulator switch assembly (for RH door) not pushed or not pulled |
11 to 14 V |
|
P6-10 (UP) - P6-1 (GND) |
LA-B - W-B |
Power window motor UP input |
Ignition switch ON, rear RH door power window moving, rear power window regulator switch assembly (for RH door) pulled halfway up (Manual operation) |
Below 1 V |
|
P6-10 (UP) - P6-1 (GND) |
LA-B - W-B |
Power window motor UP input |
Ignition switch ON, rear RH door power window fully open |
11 to 14 V |
|
P6-10 (UP) - P6-1 (GND) |
LA-B - W-B |
Power window motor UP input |
Ignition switch ON, rear RH door power window moving, rear power window regulator switch assembly (for RH door) fully pulled up (Auto operation) |
Below 1 V |
|
P6-10 (UP) - P6-1 (GND) |
LA-B - W-B |
Power window motor UP input |
Ignition switch ON, rear RH door power window fully closed |
11 to 14 V |
CHECK INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY AND MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)
(a) Remove the main body ECU (multiplex network body ECU) from the instrument panel junction block assembly.
(b) Reconnect the instrument panel junction block assembly connectors.
(c) Measure the voltage and resistance according to the value(s) in the table below.
HINT:
Measure the values on the wire harness side with the connectors connected.
|
Terminal No. (Symbol) |
Wiring Color |
Terminal Description |
Condition |
Specified Condition |
|---|---|---|---|---|
|
MB-11 (GND1) - Body ground |
- |
Ground |
Always |
Below 1 Ω |
|
MB-31 (BECU) - Body ground |
- |
Battery power supply |
Always |
11 to 14 V |
|
MB-30 (ACC) - Body ground |
- |
ACC power supply |
Ignition switch ACC |
11 to 14 V |
|
MB-30 (ACC) - Body ground |
- |
ACC power supply |
Ignition switch off |
Below 1 V |
|
MB-32 (IG) - Body ground |
- |
IG power supply |
Ignition switch ON |
11 to 14 V |
|
MB-32 (IG) - Body ground |
- |
IG power supply |
Ignition switch off or ACC |
Below 1 V |
(d) Install the main body ECU (multiplex network body ECU) to the instrument panel junction block assembly.
(e) Measure the voltage and check for pulses according to the value(s) in the table below.
|
Terminal No. (Symbol) |
Wiring Color |
Terminal Description |
Condition |
Specified Condition |
|---|---|---|---|---|
|
K52-1 (FLCY) - Body ground |
W - Body ground |
Front door courtesy light switch (for LH) input |
Front door LH open |
Below 1 V |
|
K52-1 (FLCY) - Body ground |
W - Body ground |
Front door courtesy light switch (for LH) input |
Front door LH closed |
11 to 14 V |
|
K52-6 (FRCY) - Body ground |
BE - Body ground |
Front door courtesy light switch (for RH) input |
Front door RH open |
Below 1 V |
|
K52-6 (FRCY) - Body ground |
BE - Body ground |
Front door courtesy light switch (for RH) input |
Front door RH closed |
11 to 14 V |
|
K53-18 (L2) - Body ground |
LG - Body ground |
Driver door key-linked lock input |
Driver door key cylinder turned to lock |
Below 1 V |
|
K53-18 (L2) - Body ground |
LG - Body ground |
Driver door key-linked lock input |
Driver door key cylinder not turned |
Pulse generation |
|
K53-17 (UL3) - Body ground |
BE - Body ground |
Driver door key-linked unlock input |
Driver door key cylinder turned to unlock |
Below 1 V |
|
K53-17 (UL3) - Body ground |
BE - Body ground |
Driver door key-linked unlock input |
Driver door key cylinder not turned |
Pulse generation |
|
|