Last Modified: 11-20-2023 6.11:8.1.0 Doc ID: RM1000000012UOO
Model Year Start: 2018 Model: Camry Prod Date Range: [03/2017 -           ]
Title: METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: Steering Pad Switch Circuit; 2018 - 2024 MY Camry [03/2017 -        ]

Steering Pad Switch Circuit

DESCRIPTION

The combination meter assembly and steering pad switch assembly are connected via direct line. The multi-information display in the combination meter assembly are operated using the switches of the steering pad switch assembly.

WIRING DIAGRAM

CAUTION / NOTICE / HINT

NOTICE:

When replacing the combination meter assembly, always replace it with a new one. If a combination meter assembly which was installed to another vehicle is used, the information stored in it will not match the information from the vehicle and a DTC may be stored.

PROCEDURE

1.

INSPECT STEERING PAD SWITCH ASSEMBLY

(a) Remove the steering pad switch assembly.

Click here 2018 MY Camry [03/2017 - 06/2017]; STEERING COLUMN: STEERING PAD SWITCH: REMOVAL 2018 - 2020 MY Camry [06/2017 - 10/2020]; STEERING COLUMN: STEERING PAD SWITCH: REMOVAL 2021 - 2024 MY Camry [10/2020 -        ]; STEERING COLUMN: STEERING PAD SWITCH: REMOVAL

(b) Inspect the steering pad switch assembly.

Click here 2018 - 2020 MY Camry [03/2017 - 10/2020]; STEERING COLUMN: STEERING PAD SWITCH: INSPECTION 2021 MY Camry [10/2020 - 08/2021]; STEERING COLUMN: STEERING PAD SWITCH: INSPECTION 2022 - 2024 MY Camry [08/2021 -        ]; STEERING COLUMN: STEERING PAD SWITCH: INSPECTION

NG

REPLACE STEERING PAD SWITCH ASSEMBLY 2018 MY Camry [03/2017 - 06/2017]; STEERING COLUMN: STEERING PAD SWITCH: REMOVAL 2018 - 2020 MY Camry [06/2017 - 10/2020]; STEERING COLUMN: STEERING PAD SWITCH: REMOVAL 2021 - 2024 MY Camry [10/2020 -        ]; STEERING COLUMN: STEERING PAD SWITCH: REMOVAL

OK

2.

INSPECT SPIRAL CABLE SUB-ASSEMBLY

(a) Remove the spiral cable sub-assembly.

Click here 2018 MY Camry [03/2017 - 06/2017]; SUPPLEMENTAL RESTRAINT SYSTEMS: SPIRAL CABLE: REMOVAL 2018 - 2020 MY Camry [06/2017 - 10/2020]; SUPPLEMENTAL RESTRAINT SYSTEMS: SPIRAL CABLE: REMOVAL 2021 - 2024 MY Camry [10/2020 -        ]; SUPPLEMENTAL RESTRAINT SYSTEMS: SPIRAL CABLE: REMOVAL

(b) Inspect the spiral cable sub-assembly.

Click here 2018 - 2020 MY Camry [03/2017 - 03/2020]; SUPPLEMENTAL RESTRAINT SYSTEMS: SPIRAL CABLE: INSPECTION 2020 - 2024 MY Camry [03/2020 -        ]; SUPPLEMENTAL RESTRAINT SYSTEMS: SPIRAL CABLE: INSPECTION

NG

REPLACE SPIRAL CABLE SUB-ASSEMBLY 2018 MY Camry [03/2017 - 06/2017]; SUPPLEMENTAL RESTRAINT SYSTEMS: SPIRAL CABLE: REMOVAL 2018 - 2020 MY Camry [06/2017 - 10/2020]; SUPPLEMENTAL RESTRAINT SYSTEMS: SPIRAL CABLE: REMOVAL 2021 - 2024 MY Camry [10/2020 -        ]; SUPPLEMENTAL RESTRAINT SYSTEMS: SPIRAL CABLE: REMOVAL

OK

3.

CHECK HARNESS AND CONNECTOR (SPIRAL CABLE SUB-ASSEMBLY - COMBINATION METER ASSEMBLY)

(a) Disconnect the K21 combination meter assembly connector.

(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

K22-10 (+DP2) - K21-28 (MSM+)

Always

Below 1 Ω

K22-11 (+DP) - K21-29 (MSTI)

Always

Below 1 Ω

K22-10 (+DP2) or K21-28 (MSM+) - Body ground

Always

10 kΩ or higher

K22-11 (+DP) or K21-29 (MSTI) - Body ground

Always

10 kΩ or higher

OK

REPLACE COMBINATION METER ASSEMBLY 2018 MY Camry [03/2017 - 06/2017]; METER / GAUGE / DISPLAY: COMBINATION METER: REMOVAL 2018 - 2020 MY Camry [06/2017 - 10/2020]; METER / GAUGE / DISPLAY: COMBINATION METER: REMOVAL 2021 - 2024 MY Camry [10/2020 -        ]; METER / GAUGE / DISPLAY: COMBINATION METER: REMOVAL

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR