Last Modified: 11-20-2023 6.11:8.1.0 Doc ID: RM1000000012UAL
Model Year Start: 2018 Model: Camry Prod Date Range: [03/2017 - 06/2017]
Title: STEERING COLUMN: STEERING WHEEL: INSTALLATION; 2018 MY Camry [03/2017 - 06/2017]

INSTALLATION

CAUTION / NOTICE / HINT

NOTICE:

  • Do not remove/install the spiral cable with sensor sub-assembly with the battery connected and the ignition switch ON.
  • Do not rotate the spiral cable with sensor sub-assembly without the steering wheel assembly installed, with the battery connected and the ignition switch ON.
  • Ensure that the steering wheel assembly is installed and aligned straight when inspecting the steering sensor.

PROCEDURE

1. INSTALL NO. 1 SWITCH WIRE (w/ Shift Paddle Switch)

Click here 2018 - 2024 MY Camry [03/2017 -        ]; UB80E (AUTOMATIC TRANSMISSION / TRANSAXLE): SHIFT PADDLE SWITCH: INSTALLATION+

2. INSTALL SHIFT PADDLE SWITCH (TRANSMISSION SHIFT SWITCH ASSEMBLY) (w/ Shift Paddle Switch)

Click here 2018 - 2024 MY Camry [03/2017 -        ]; UB80E (AUTOMATIC TRANSMISSION / TRANSAXLE): SHIFT PADDLE SWITCH: INSTALLATION+

3. INSTALL STEERING PAD SWITCH ASSEMBLY

Click here 2018 - 2024 MY Camry [03/2017 -        ]; STEERING COLUMN: STEERING PAD SWITCH: INSTALLATION+

4. ALIGN FRONT WHEELS FACING STRAIGHT AHEAD

5. INSPECT AND ADJUST SPIRAL CABLE WITH SENSOR SUB-ASSEMBLY

Click here 2018 MY Camry [03/2017 - 06/2017]; SUPPLEMENTAL RESTRAINT SYSTEMS: SPIRAL CABLE: INSTALLATION+

6. INSTALL STEERING WHEEL ASSEMBLY

(a) Align the matchmarks on the steering wheel assembly and steering main shaft to install the steering wheel assembly.

*a

Matchmark

(b) Using a 10 mm hexagon socket wrench, install the steering wheel assembly set bolt.

Torque:

62 N·m {632 kgf·cm, 46 ft·lbf}

(c) Connect each connector to the spiral cable with sensor sub-assembly.

7. CHECK STEERING WHEEL CENTER POINT

8. INSTALL HORN BUTTON ASSEMBLY

Click here 2018 MY Camry [03/2017 - 06/2017]; SUPPLEMENTAL RESTRAINT SYSTEMS: STEERING PAD: INSTALLATION