| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM1000000012TXD |
| Model Year Start: 2018 | Model: Camry | Prod Date Range: [03/2017 - ] |
| Title: LIGHTING (EXT): LICENSE PLATE LIGHT ASSEMBLY: INSPECTION; 2018 - 2024 MY Camry [03/2017 - ] | ||
INSPECTION
PROCEDURE
1. INSPECT LICENSE PLATE LIGHT ASSEMBLY
|
*a |
Component without harness connected (License Plate Light Assembly) |
(a) Connect 4 dry-cell batteries (1.5 V) in series.
NOTICE:
Do not use rechargeable batteries as they may not output a voltage of 1.5 V.
(b) Apply 6 V batter voltage to the terminals of the connector and check that the license plate light illuminates.
OK:
|
Condition |
Specified Condition |
|---|---|
|
Positive (+) lead from the batteries → Terminal 1 (B) Negative (-) lead from the batteries → Terminal 2 (E) |
License plate light illuminates |
If the result is not as specified, replace the license plate light assembly.
|
|