| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM1000000012TWB |
| Model Year Start: 2018 | Model: Camry | Prod Date Range: [03/2017 - 06/2017] |
| Title: PARKING BRAKE: PARKING BRAKE CABLE (for Front Side): INSTALLATION; 2018 MY Camry [03/2017 - 06/2017] | ||
INSTALLATION
PROCEDURE
1. INSTALL NO. 1 PARKING BRAKE CABLE ASSEMBLY
|
(a) Install the No. 1 parking brake cable assembly with the 3 bolts and nut. Torque: Bolt: : 15.5 N·m {158 kgf·cm, 11 ft·lbf} Nut: : 6.0 N·m {61 kgf·cm, 53 in·lbf} |
|
|
(b) Install the nut. Torque: 6.0 N·m {61 kgf·cm, 53 in·lbf} |
|
|
(c) Connect the brake pedal support base to the vehicle body with the 2 nuts. Torque: 12.7 N·m {130 kgf·cm, 9 ft·lbf} |
|
(d) Engage the 4 clamps.
2. INSTALL BRAKE PEDAL SUPPORT ASSEMBLY
Click here
![2018 MY Camry [03/2017 - 06/2017]; BRAKE SYSTEM (OTHER): BRAKE PEDAL: INSTALLATION](/t3Portal/stylegraphics/info.gif)
3. CONNECT NO. 1 PARKING BRAKE CABLE ASSEMBLY
|
(a) Connect the No. 1 parking brake cable assembly to the No. 1 parking brake pull rod sub-assembly as shown in the illustration. Torque: 5.4 N·m {55 kgf·cm, 48 in·lbf} |
|
4. INSTALL NO. 2 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY (w/ Smart Key System)
Click here
5. INSTALL NO. 1 CONSOLE BOX DUCT (for Dual Type)
(a) Install the No. 1 console box duct with the clip as shown in the illustration.
|
Install in this Direction |
6. INSTALL REAR NO. 1 AIR DUCT
Click here
7. INSTALL REAR NO. 2 AIR DUCT
(a) Engage the 4 claws to install the rear No. 2 air duct as shown in the illustration.
|
|
Install in this Direction |
8. INSTALL FRONT FLOOR CARPET ASSEMBLY
(a) for LH Side:
(1) Install the front floor carpet assembly to its original position as shown in the illustration.
|
Fastener |
- |
- |
(2) Engage each fastener and the 3 guides to connect the front floor carpet assembly.
(3) Install the 2 front floor carpet clips.
(b) for RH Side:
(1) Install the front floor carpet assembly to its original position as shown in the illustration.
(2) Engage the 3 guides to connect the front floor carpet assembly.
(3) Install the 2 front floor carpet clips.
9. INSTALL FRONT FLOOR CAUTION PLATE COVER
Click here
10. INSTALL ACCELERATOR PEDAL
Click here
11. INSTALL LOWER CENTER PILLAR GARNISH LH
Click here
12. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH
Click here
13. INSTALL REAR DOOR SCUFF PLATE LH
Click here
14. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH
Click here
15. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
Click here
16. INSTALL LOWER CENTER PILLAR GARNISH RH
HINT:
Use the same procedure as for the LH side.
17. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH
HINT:
Use the same procedure as for the LH side.
18. INSTALL REAR DOOR SCUFF PLATE RH
HINT:
Use the same procedure as for the LH side.
19. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH
HINT:
Use the same procedure as for the LH side.
20. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH
HINT:
Use the same procedure as for the LH side.
21. INSTALL FRONT DOOR SCUFF PLATE RH
HINT:
Use the same procedure as for the LH side.
22. INSTALL REAR SEAT CUSHION LOCK HOOK
Click here
23. INSTALL REAR SEAT CUSHION ASSEMBLY
Click here
24. CONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY
Click here
25. INSTALL CONSOLE BOX ASSEMBLY
Click here
26. INSTALL FRONT SEAT ASSEMBLY LH
Click here
27. INSTALL FRONT SEAT ASSEMBLY RH
Click here
28. INSTALL PARKING BRAKE PEDAL ASSEMBLY
Click here
|
|