| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM1000000012TVV |
| Model Year Start: 2018 | Model: Camry | Prod Date Range: [03/2017 - 06/2017] |
| Title: SEAT: REAR SEAT ASSEMBLY (for Fold Down Seat Type): DISASSEMBLY; 2018 MY Camry [03/2017 - 06/2017] | ||
DISASSEMBLY
CAUTION / NOTICE / HINT
CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.
PROCEDURE
1. REMOVE REAR SEAT SHOULDER BELT GUIDE LH (for LH Side)
|
(a) Remove the 2 screws. |
|
(b) Disengage the guide to remove the rear seat shoulder belt guide LH.
2. REMOVE REAR SIDE SEATBACK COVER WITH PAD (for LH Side)
|
(a) Remove the 2 nuts. |
|
|
(b) Disengage the 15 hooks. |
|
(c) Remove the rear side seatback cover with pad from the rear side seatback frame sub-assembly LH as shown in the illustration.
|
Remove in this Direction |
3. REMOVE REAR SEAT AIRBAG ASSEMBLY LH (for LH Side)
Click here
![2018 MY Camry [03/2017 - 06/2017]; SUPPLEMENTAL RESTRAINT SYSTEMS: REAR SEAT SIDE AIRBAG ASSEMBLY (for Fold Down Seat Type): REMOVAL+](/t3Portal/stylegraphics/info.gif)
4. REMOVE REAR SIDE SEATBACK COVER SUB-ASSEMBLY LH (for LH Side)
(a) Remove the rear side seatback cover sub-assembly LH from the rear side seatback pad LH.
5. REMOVE REAR SEAT SHOULDER BELT GUIDE RH (for RH Side)
HINT:
Use the same procedure as for the LH side.
6. REMOVE REAR SIDE SEATBACK COVER WITH PAD (for RH Side)
HINT:
Use the same procedure as for the LH side.
7. REMOVE REAR SEAT AIRBAG ASSEMBLY RH (for RH Side)
HINT:
Use the same procedure as for the LH side.
8. REMOVE REAR SIDE SEATBACK COVER SUB-ASSEMBLY RH (for RH Side)
HINT:
Use the same procedure as for the LH side.
9. REMOVE REAR SEATBACK UPPER LOCK BEZEL (for LH Side)
|
(a) Disengage the 4 claws to remove the rear seatback upper lock bezel. |
|
10. REMOVE SEPARATE TYPE REAR SEATBACK COVER WITH PAD (for LH Side)
|
(a) Open the 2 fasteners as shown in the illustration. |
|
|
(b) Disengage the 4 hooks. |
|
(c) Remove the separate type rear seatback cover with pad from the rear seatback frame sub-assembly LH as shown in the illustration.
|
|
Remove in this Direction |
11. REMOVE SEPARATE TYPE REAR SEATBACK COVER (for LH Side)
(a) Using a screwdriver, disengage the 6 claws and remove the separate type rear seatback cover from the separate type rear seatback pad as shown in the illustration.
|
*a |
Screwdriver |
- |
- |
12. REMOVE REAR SEATBACK HINGE COVER (for RH Side)
(a) Disengage the 2 claws.
|
|
Remove in this Direction |
(b) Disengage the pin and remove the rear seatback hinge cover as shown in the illustration.
13. REMOVE REAR SEAT CENTER ARMREST ASSEMBLY (for RH Side)
|
(a) Remove the bolt and bush. |
|
(b) Disengage the pin and remove the rear seat center armrest assembly as shown in the illustration.
|
|
Remove in this Direction (1) |
|
Remove in this Direction (2) |
(c) Remove the bush as shown in the illustration.
|
|
Remove in this Direction |
14. REMOVE REAR SEAT CENTER ARMREST CUP HOLDER SUB-ASSEMBLY (for RH Side)
|
(a) Using a moulding remover, disengage the 2 claws as shown in the illustration. |
|
(b) Disengage the 2 guides and remove the rear seat center armrest cup holder sub-assembly as shown in the illustration.
|
|
Remove in this Direction |
15. REMOVE REAR SEAT CENTER ARMREST COVER SUB-ASSEMBLY (for RH Side)
|
(a) Open the fastener as shown in the illustration and remove the rear seat center armrest cover sub-assembly from the rear seat center armrest pad sub-assembly. |
|
16. REMOVE REAR SEAT CENTER SHOULDER BELT GUIDE (for RH Side)
|
(a) Remove the 2 screws. |
|
(b) Disengage the guide to remove the rear seat center shoulder belt guide.
17. REMOVE REAR SEATBACK UPPER LOCK BEZEL (for RH Side)
|
(a) Disengage the 4 claws to remove the rear seatback upper lock bezel. |
|
18. REMOVE SEPARATE TYPE REAR SEATBACK COVER WITH PAD (for RH Side)
|
(a) Open the 2 fasteners as shown in the illustration. |
|
|
(b) Disengage the 6 hooks. |
|
(c) Remove the separate type rear seatback cover with pad from the rear seatback frame sub-assembly RH as shown in the illustration.
|
|
Remove in this Direction |
19. REMOVE SEPARATE TYPE REAR SEATBACK COVER (for RH Side)
|
(a) Disengage the 6 guides. |
|
(b) Using a screwdriver, disengage the 6 claws and remove the separate type rear seatback cover from the separate type rear seatback pad as shown in the illustration.
|
*a |
Screwdriver |
- |
- |
20. REMOVE CHILD RESTRAINT SEAT COVER
(a) Disengage the 2 claws and 2 guides to remove the child restraint seat cover as shown in the illustration.
|
|
Remove in this Direction |
HINT:
Use the same procedure for all of the child restraint seat covers.
21. REMOVE CHILD RESTRAINT SEAT BASE COVER
(a) Remove the screw.
|
|
Remove in this Direction |
(b) Disengage the claw and guide to remove the child restraint seat base cover as shown in the illustration.
HINT:
Use the same procedure for all of the child restraint seat base covers.
22. REMOVE BENCH TYPE REAR SEAT CUSHION COVER
(a) Disengage the 4 fasteners.
|
*a |
Fastener |
- |
- |
(b) Disengage the 6 hooks.
(c) Remove the 6 hog rings.
(d) Remove the 2 hog rings.
(e) Disengage the 20 hooks.
(f) Using a screwdriver, disengage the 24 claws and remove the bench type rear seat cushion cover from the rear seat cushion pad sub-assembly as shown in the illustration.
|
*a |
Screwdriver |
- |
- |
|
|