| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM1000000012TVO |
| Model Year Start: 2018 | Model: Camry | Prod Date Range: [03/2017 - 06/2017] |
| Title: LIGHTING (EXT): HEADLIGHT ASSEMBLY: INSPECTION; 2018 MY Camry [03/2017 - 06/2017] | ||
INSPECTION
PROCEDURE
1. INSPECT HEADLIGHT UNIT ASSEMBLY LH
|
*a |
Component without harness connected (Headlight Unit Assembly LH) |
(a) Apply battery voltage to the headlight unit assembly LH and check that the Lo/Hi beam shade operates.
OK:
|
Condition |
Specified Condition |
|---|---|
|
Battery positive (+) → Terminal 4 (SOL) Battery negative (-) → Terminal 1 (E) |
Operates normally |
If the result is not as specified, replace the headlight unit assembly LH.
(b) Apply battery voltage to the headlight unit assembly LH and check that the light illuminates.
OK:
|
Condition |
Specified Condition |
|---|---|
|
Battery positive (+) → Terminal 3 (LO) Battery negative (-) → Terminal 1 (E) |
Lo/Hi beam headlight illuminates |
If the result is not as specified, replace the headlight unit assembly LH.
2. INSPECT HEADLIGHT UNIT ASSEMBLY RH
|
*a |
Component without harness connected (Headlight Unit Assembly RH) |
(a) Apply battery voltage to the headlight unit assembly RH and check that the Lo/Hi beam shade operates.
OK:
|
Condition |
Specified Condition |
|---|---|
|
Battery positive (+) → Terminal 4 (SOL) Battery negative (-) → Terminal 1 (E) |
Operates normally |
If the result is not as specified, replace the headlight unit assembly RH.
(b) Apply battery voltage to the headlight unit assembly RH and check that the light illuminates.
OK:
|
Condition |
Specified Condition |
|---|---|
|
Battery positive (+) → Terminal 3 (LO) Battery negative (-) → Terminal 1 (E) |
Lo/Hi beam headlight illuminates |
If the result is not as specified, replace the headlight unit assembly RH.
|
|