Last Modified: 11-20-2023 6.11:8.1.0 Doc ID: RM1000000012TVL
Model Year Start: 2018 Model: Camry Prod Date Range: [03/2017 - 08/2018]
Title: SEAT: LUMBAR SUPPORT ADJUSTER ASSEMBLY (for TMC Made Power Seat): REMOVAL; 2018 MY Camry [03/2017 - 08/2018]

REMOVAL

CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during lumbar support adjuster assembly LH removal/installation are shown below.

Necessary Procedure After Parts Removed/Installed/Replaced

Replaced Part or Performed Procedure

Necessary Procedure

Effect/Inoperative Function when Necessary Procedure not Performed

Link

Disconnect cable from negative battery terminal

Perform steering sensor zero point calibration

Lane departure alert system (w/ Steering Control)

2018 - 2020 MY Camry [03/2017 - 10/2020]; PRE-COLLISION: PRE-COLLISION SYSTEM: INITIALIZATION

Pre-collision system

Memorize steering angle neutral point

Parking assist monitor system

2018 - 2024 MY Camry [03/2017 -        ]; PARK ASSIST / MONITORING: PARKING ASSIST MONITOR SYSTEM: INITIALIZATION

CAUTION:

  • Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing.

    Click here 2018 MY Camry [03/2017 - 06/2017]; SUPPLEMENTAL RESTRAINT SYSTEMS: AIRBAG SYSTEM: PRECAUTION 2018 - 2019 MY Camry [06/2017 - 09/2019]; SUPPLEMENTAL RESTRAINT SYSTEMS: AIRBAG SYSTEM: PRECAUTION

  • Wear protective gloves. Sharp areas on the parts may injure your hands.

PROCEDURE

1. REMOVE FRONT SEAT ASSEMBLY LH

Click here 2018 - 2019 MY Camry [03/2017 - 09/2019]; SEAT: FRONT SEAT ASSEMBLY (for TMC Made Power Seat): REMOVAL

2. DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER

Click here 2018 MY Camry [03/2017 - 08/2018]; SEAT: FRONT SEAT ASSEMBLY (for TMC Made Power Seat): DISASSEMBLY+

3. REMOVE FRONT SEAT FRONT CUSHION SHIELD LH

Click here 2018 MY Camry [03/2017 - 08/2018]; SEAT: FRONT SEAT ASSEMBLY (for TMC Made Power Seat): DISASSEMBLY+

4. REMOVE FRONT SEAT CUSHION SHIELD LH

Click here 2018 MY Camry [03/2017 - 08/2018]; SEAT: FRONT SEAT ASSEMBLY (for TMC Made Power Seat): DISASSEMBLY+

5. REMOVE FRONT SEAT INNER CUSHION SHIELD LH

Click here 2018 MY Camry [03/2017 - 08/2018]; SEAT: FRONT SEAT ASSEMBLY (for TMC Made Power Seat): DISASSEMBLY+

6. REMOVE SEPARATE TYPE FRONT SEATBACK ASSEMBLY

Click here 2018 MY Camry [03/2017 - 08/2018]; SEAT: FRONT SEAT ASSEMBLY (for TMC Made Power Seat): DISASSEMBLY+

7. REMOVE FRONT SEAT HEADREST SUPPORT

Click here 2018 MY Camry [03/2017 - 08/2018]; SEAT: FRONT SEAT ASSEMBLY (for TMC Made Power Seat): DISASSEMBLY+

8. REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD

Click here 2018 MY Camry [03/2017 - 08/2018]; SEAT: FRONT SEAT ASSEMBLY (for TMC Made Power Seat): DISASSEMBLY+

9. REMOVE LUMBAR SUPPORT ADJUSTER ASSEMBLY LH

(a) Disconnect the lumbar support adjuster assembly LH connector.

(b) Disengage the clamp.

(c) Disengage the 2 claws to remove the 2 front seatback edge protectors from the front seatback frame sub-assembly LH.

(d) Remove the lumbar support adjuster assembly LH from the front seatback frame sub-assembly LH as shown in the illustration.

Remove in this direction

10. REMOVE FRONT SEATBACK EDGE PROTECTOR

Click here 2018 MY Camry [03/2017 - 08/2018]; SEAT: FRONT SEAT ASSEMBLY (for TMC Made Power Seat): DISASSEMBLY+