Last Modified: 11-20-2023 |
6.11:8.1.0 |
Doc ID: RM1000000012TVH |
Model Year Start: 2018 |
Model: Camry |
Prod Date Range: [03/2017 - 09/2019] |
Title: SEAT: POWER SEAT SWITCH (for TMC Made Power Seat): REMOVAL; 2018 - 2019 MY Camry [03/2017 - 09/2019] |
REMOVAL
CAUTION / NOTICE / HINT
The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during front power seat switch LH removal/installation are shown below.
Necessary Procedures After Parts Removed/Installed/Replaced
Replaced Part or Performed Procedure
|
Necessary Procedure
|
Effect/Inoperative Function when Necessary Procedure not Performed
|
Link
|
Disconnect cable from negative battery terminal
|
Perform steering sensor zero point calibration
|
Lane departure alert system (w/ Steering Control)
|
|
Pre-collision system
|
Memorize steering angle neutral point
|
Parking assist monitor system
|
|
CAUTION:
-
Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing.
Click here
-
Wear protective gloves. Sharp areas on the parts may injure your hands.
PROCEDURE
1. REMOVE FRONT SEAT ASSEMBLY LH
Click here
2. DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER
Click here
3. REMOVE FRONT SEAT FRONT CUSHION SHIELD LH
Click here
4. REMOVE FRONT SEAT CUSHION SHIELD LH
Click here
5. REMOVE SLIDE & VERTICAL POWER SEAT SWITCH KNOB
Click here
6. REMOVE RECLINING POWER SEAT SWITCH KNOB
Click here
7. REMOVE SEAT ADJUSTER SHIELD CLAMP BRACKET LH
Click here
8. REMOVE FRONT POWER SEAT SWITCH LH
(a) Remove the 2 screws and front power seat switch LH from the front seat cushion shield LH.
|
|
|