| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM1000000012TNE |
| Model Year Start: 2018 | Model: Camry | Prod Date Range: [03/2017 - ] |
| Title: MAINTENANCE: REAR TURN SIGNAL LIGHT BULB: REMOVAL; 2018 - 2024 MY Camry [03/2017 - ] | ||
REMOVAL
CAUTION / NOTICE / HINT
HINT:
- Use the same procedure for the RH side and LH side.
- The following procedure is for the LH side.
PROCEDURE
1. REMOVE REAR COMBINATION LIGHT COVER
Click here
![2018 - 2024 MY Camry [03/2017 - ]; LIGHTING (EXT): REAR COMBINATION LIGHT ASSEMBLY: REMOVAL+](/t3Portal/stylegraphics/info.gif)
2. SEPARATE REAR COMBINATION LIGHT ASSEMBLY
(a) Apply protective tape around the rear combination light assembly as shown in the illustration.
|
Protective Tape |
|
(b) Remove the 2 screws. |
|
(c) Pull the rear combination light assembly toward the rear of the vehicle as shown in the illustration to disengage the pin and 3 guides and separate the rear combination light assembly.
NOTICE:
To prevent the rear combination light assembly from falling when disengaging the pin and guides, lightly hold the rear combination light assembly.
|
*a |
Pin |
|
*b |
Guide |
|
Remove in this Direction |
3. REMOVE REAR TURN SIGNAL LIGHT BULB
(a) Turn the rear combination light socket and wire with the rear turn signal light bulb as shown in the illustration to disconnect them as a unit.
|
|
Remove in this Direction |
(b) Remove the rear turn signal light bulb from the rear combination light socket and wire.
|
|