Last Modified: 11-20-2023 |
6.11:8.1.0 |
Doc ID: RM1000000012TIA |
Model Year Start: 2018 |
Model: Camry |
Prod Date Range: [03/2017 -
] |
Title: SEAT BELT: SEAT BELT WARNING SYSTEM: HOW TO PROCEED WITH TROUBLESHOOTING; 2018 - 2024 MY Camry [03/2017 - ] |
HOW TO PROCEED WITH TROUBLESHOOTING
|
CAUTION / NOTICE / HINT
HINT:
-
Use the following procedure to troubleshoot the seat belt warning system.
-
*: Use the Techstream.
PROCEDURE
1.
|
VEHICLE BROUGHT TO WORKSHOP
|
NEXT
|
|
|
2.
|
CUSTOMER PROBLEM ANALYSIS
|
(a) Interview the customer to confirm the problem.
Click here
NEXT
|
|
|
(a) Measure the battery voltage.
Standard Voltage:
11 to 14 V
If the voltage is below 11 V, recharge or replace the battery before proceeding to the next step.
(b) Check the fuses and relays.
(c) Check the connector connections and terminals to make sure that there are no abnormalities such as loose connections, deformation, etc.
NEXT
|
|
|
4.
|
CHECK COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*
|
(a) Using the Techstream, check for CAN communication system DTCs.
Click here
Result
|
Proceed to
|
CAN DTCs are not output
|
A
|
CAN DTCs are output
|
B
|
A
|
|
|
5.
|
CHECK DTC OUTPUT (AIRBAG SYSTEM)*
|
(a) Clear the DTCs.
Body Electrical > SRS Airbag > Clear DTCs
(b) Check for DTCs.
Body Electrical > SRS Airbag > Trouble Codes
Result
|
Proceed to
|
DTCs are not output
|
A
|
DTCs are output
|
B
|
A
|
|
|
6.
|
CHECK DTC OUTPUT (OCCUPANT CLASSIFICATION SYSTEM)*
|
(a) Clear the DTCs.
Body Electrical > Occupant Detection > Clear DTCs
(b) Check for DTCs.
Body Electrical > Occupant Detection > Trouble Codes
Result
|
Proceed to
|
DTCs are not output
|
A
|
DTCs are output
|
B
|
A
|
|
|
7.
|
CHECK COMBINATION METER ASSEMBLY
|
(a) Check the operation of the speedometer, shift indicator and brake warning light on the combination meter assembly.
OK:
The speedometer, shift indicator and brake warning light on the combination meter assembly operate normally.
OK
|
|
|
8.
|
PROBLEM SYMPTOMS TABLE
|
(a) Refer to Problem Symptoms Table.
Click here
Result
|
Proceed to
|
Fault is not listed in Problem Symptoms Table
|
A
|
Fault is listed in Problem Symptoms Table
|
B
|
A
|
|
|
9.
|
OVERALL ANALYSIS AND TROUBLESHOOTING*
|
(a) Data List / Active Test
Click here
(b) Terminals of ECU
Click here
(c) On-vehicle Inspection
Click here
NEXT
|
|
|
NEXT
|
|
|
NEXT |
|
END
|
|