Last Modified: 11-20-2023 6.11:8.1.0 Doc ID: RM1000000012TGH
Model Year Start: 2018 Model: Camry Prod Date Range: [03/2017 - 06/2017]
Title: SEAT BELT: FRONT SEAT INNER BELT ASSEMBLY: REMOVAL; 2018 MY Camry [03/2017 - 06/2017]

REMOVAL

CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during front seat inner belt assembly removal/installation are shown below.

Necessary Procedure After Parts Removed/Installed/Replaced

Replaced Part or Performed Procedure

Necessary Procedure

Effect/Inoperative Function when Necessary Procedure not Performed

Link

Disconnect cable from negative battery terminal

Perform steering sensor zero point calibration

Lane Departure Alert System (w/ Steering Control)

2018 - 2020 MY Camry [03/2017 - 10/2020]; PRE-COLLISION: PRE-COLLISION SYSTEM: INITIALIZATION

Pre-collision system

Memorize steering angle neutral point

Parking Assist Monitor System

2018 - 2024 MY Camry [03/2017 -        ]; PARK ASSIST / MONITORING: PARKING ASSIST MONITOR SYSTEM: INITIALIZATION

Front passenger seat

Zero point calibration (Occupant classification system)
  • Occupant classification system
  • Passenger airbag ON/OFF indicator
  • Airbag system (Front passenger side)
  • Seat belt warning system (Front passenger side)

2018 MY Camry [03/2017 - 06/2017]; SUPPLEMENTAL RESTRAINT SYSTEMS: OCCUPANT CLASSIFICATION SYSTEM: INITIALIZATION

PROCEDURE

1. REMOVE FRONT SEAT ASSEMBLY LH (for Driver Side)

Click here 2018 - 2019 MY Camry [03/2017 - 09/2019]; SEAT: FRONT SEAT ASSEMBLY (for TMC Made Power Seat): REMOVAL

2. REMOVE FRONT SEAT ASSEMBLY RH (for Front Passenger Side)

Click here 2018 - 2019 MY Camry [03/2017 - 09/2019]; SEAT: FRONT SEAT ASSEMBLY (for TMC Made Manual Seat): REMOVAL

3. REMOVE FRONT SEAT INNER BELT ASSEMBLY LH (for Driver Side)

(a) Disconnect each connector.

(b) Disengage each clamp.

(c) Remove the nut and front seat inner belt assembly LH.

(d) Remove the front seat belt anchor plate as shown in the illustration.

Remove in this Direction

4. REMOVE FRONT SEAT INNER BELT ASSEMBLY RH (for Front Passenger Side)

(a) Disconnect each connector.

(b) Disengage each clamp.

(c) Remove the nut and front seat inner belt assembly RH.

(d) Remove the front seat belt anchor plate as shown in the illustration.

Remove in this Direction