| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM1000000012TDS |
| Model Year Start: 2018 | Model: Camry | Prod Date Range: [03/2017 - ] |
| Title: PARK ASSIST / MONITORING: PARKING ASSIST MONITOR SYSTEM: DATA LIST / ACTIVE TEST; 2018 - 2024 MY Camry [03/2017 - ] | ||
DATA LIST / ACTIVE TEST
DATA LIST
NOTICE:
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
HINT:
Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Chassis / Parking Assist Camera / Data List.
(e) Read the Data List according to the display on the Techstream.
Chassis > Parking Assist Camera > Data List
|
Tester Display |
Measurement Item |
Range |
Normal Condition |
Diagnostic Note |
|---|---|---|---|---|
|
Video Output Status |
Output condition of video signal |
OK or NG |
OK: Output condition of video signal is normal NG: Output condition of video signal is abnormal |
- |
|
Destination Data Check |
Verification of destination data |
OK or NG |
OK: Data verification normal NG: Data verification abnormal |
- |
|
RHD/LHD Signal Check |
Verification of RHD/LHD signal |
OK or NG |
OK: Output condition of RHD/LHD signal is normal NG: Output condition of RHD/LHD signal is abnormal |
- |
|
Circumference Monitoring System Type Check |
Verification of rear television camera assembly signal |
OK or NG |
OK: Rear television camera assembly normal NG: Rear television camera assembly abnormal |
- |
|
EEPROM Status (Initial read) |
Rear television camera assembly information |
OK or NG |
OK: Rear television camera assembly normal NG: Rear television camera assembly abnormal |
- |
|
CPU Communication Status |
Rear television camera assembly information |
OK or NG |
OK: Rear television camera assembly normal NG: Rear television camera assembly abnormal |
- |
|
Number of DTC |
Number of stored DTCs |
min.: 0, max.: 255 |
Number of DTCs will be displayed |
- |
|
Current Key Cycle |
Cumulative number of times the engine switch was turned on (IG) |
Min.: 0, Max.: 65535 time |
Cumulative number of times the engine switch was turned on (IG) will be displayed |
- |
|
Current Key Cycle Elapsed Time |
Time elapsed since the engine switch was turned on (IG) |
Min.: 0, Max.: 1677721.5 s |
Time elapsed since the engine switch was turned on (IG) will be displayed |
- |
|
|