| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM1000000012TDM |
| Model Year Start: 2018 | Model: Camry | Prod Date Range: [03/2017 - ] |
| Title: PARK ASSIST / MONITORING: PARKING ASSIST MONITOR SYSTEM: C1626; Steering Angle Sensor Failure; 2018 - 2024 MY Camry [03/2017 - ] | ||
|
DTC |
C1626 |
Steering Angle Sensor Failure |
DESCRIPTION
This DTC is stored if the rear television camera assembly receives a signal via CAN communication from the steering sensor that indicates an internal malfunction.
|
DTC No. |
Detection Item |
DTC Detection Condition |
Trouble Area |
|---|---|---|---|
|
C1626 |
Steering Angle Sensor Failure |
A fail flag is transmitted from the steering sensor |
|
CAUTION / NOTICE / HINT
NOTICE:
Depending on the parts that are replaced or operations that are performed during vehicle inspection or maintenance, calibration of other systems as well as the parking assist monitor system may be needed.
Click here
![2018 MY Camry [03/2017 - 06/2017]; PARK ASSIST / MONITORING: PARKING ASSIST MONITOR SYSTEM: CALIBRATION](/t3Portal/stylegraphics/info.gif)
PROCEDURE
|
1. |
CHECK DTC OUTPUT |
(a) Clear the DTCs.
Chassis > Parking Assist Camera > Clear DTCs
(b) Recheck for DTCs and check that no DTCs are output.
Chassis > Parking Assist Camera > Trouble Codes
|
Result |
Proceed to |
|---|---|
|
DTC C1626 is output |
A |
|
DTC C1626 is not output |
B |
| B |
|
USE SIMULATION METHOD TO CHECK
|
|
|
2. |
REPLACE STEERING SENSOR |
(a) Replace the steering sensor with a new or known good one.
Click here
|
|
3. |
CHECK DTC OUTPUT |
(a) Clear the DTCs.
Chassis > Parking Assist Camera > Clear DTCs
(b) Recheck for DTCs and check that no DTCs are output.
Chassis > Parking Assist Camera > Trouble Codes
|
Result |
Proceed to |
|---|---|
|
DTC C1626 is output |
A |
|
DTC C1626 is not output |
B |
| A |
|
REPLACE REAR TELEVISION CAMERA ASSEMBLY
|
| B |
|
END |
|
|