| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM1000000012TD7 |
| Model Year Start: 2018 | Model: Camry | Prod Date Range: [03/2017 - 06/2017] |
| Title: POWER ASSIST SYSTEMS: POWER STEERING SYSTEM: C1541; Vehicle Speed Signal; 2018 MY Camry [03/2017 - 06/2017] | ||
|
DTC |
C1541 |
Vehicle Speed Signal |
DESCRIPTION
The power steering ECU (rack and pinion power steering gear assembly) receives vehicle speed signals from the skid control ECU (brake actuator assembly) via CAN communication. The ECU provides appropriate assist force in accordance with the vehicle speed based on the signals.
|
DTC No. |
Detection Item |
DTC Detection Condition |
Trouble Area |
Warning Indicate |
Return-to-normal Condition |
Note |
|---|---|---|---|---|---|---|
|
C1541 |
Vehicle Speed Signal |
A vehicle speed signal malfunction is detected |
|
EPS warning light: Comes on |
The ECU judges the system has returned to normal |
- |
CAUTION / NOTICE / HINT
NOTICE:
If the rack and pinion power steering gear assembly has been replaced, perform assist map writing and torque sensor zero point calibration.
Click here
![2018 - 2024 MY Camry [03/2017 - ]; POWER ASSIST SYSTEMS: POWER STEERING SYSTEM: CALIBRATION](/t3Portal/stylegraphics/info.gif)
PROCEDURE
|
1. |
CHECK CAN COMMUNICATION SYSTEM |
(a) Check if DTC U0129 is output.
Chassis > EMPS > Trouble Codes
|
Result |
Proceed to |
|---|---|
|
DTC U0129 is not output. |
A |
|
DTC U0129 is output. |
B |
| A |
|
| B |
|
GO TO CAN COMMUNICATION SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING) |
|
|