| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM1000000012T9I |
| Model Year Start: 2018 | Model: Camry | Prod Date Range: [03/2017 - 06/2017] |
| Title: LIGHTING (EXT): RELAY: ON-VEHICLE INSPECTION; 2018 MY Camry [03/2017 - 06/2017] | ||
ON-VEHICLE INSPECTION
PROCEDURE
1. INSPECT H-LP LH RELAY
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
|
Tester Connection |
Condition |
Specified Condition |
|---|---|---|
|
3 - 5 |
Voltage not applied between terminals 1 and 2 |
10 kΩ or higher |
|
3 - 5 |
Voltage applied between terminals 1 and 2 |
Below 1 Ω |
If the result is not as specified, replace the H-LP LH relay.
2. INSPECT H-LP RH RELAY
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
|
Tester Connection |
Condition |
Specified Condition |
|---|---|---|
|
3 - 5 |
Voltage not applied between terminals 1 and 2 |
10 kΩ or higher |
|
3 - 5 |
Voltage applied between terminals 1 and 2 |
Below 1 Ω |
If the result is not as specified, replace the H-LP RH relay.
3. INSPECT DIM RELAY
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
|
Tester Connection |
Condition |
Specified Condition |
|---|---|---|
|
3 - 5 |
Voltage not applied between terminals 1 and 2 |
10 kΩ or higher |
|
3 - 5 |
Voltage applied between terminals 1 and 2 |
Below 1 Ω |
If the result is not as specified, replace the DIM relay.
|
|