Last Modified: 11-20-2023 6.11:8.1.0 Doc ID: RM1000000012T88
Model Year Start: 2018 Model: Camry Prod Date Range: [03/2017 - 06/2017]
Title: LIGHTING (EXT): REAR COMBINATION LIGHT ASSEMBLY: DISASSEMBLY; 2018 MY Camry [03/2017 - 06/2017]

DISASSEMBLY

CAUTION / NOTICE / HINT

HINT:

  • Use the same procedure for the RH side and LH side.
  • The following procedure is for the LH side.

PROCEDURE

1. REMOVE REAR SIDE MARKER LIGHT BULB

(a) Turn the rear combination light socket and wire with the rear side marker light bulb as shown in the illustration to disconnect them as a unit.

Remove in this Direction

(b) Remove the rear side marker light bulb from the rear combination light socket and wire.

2. REMOVE REAR TURN SIGNAL LIGHT BULB

(a) Turn the rear combination light socket and wire with the rear turn signal light bulb as shown in the illustration to disconnect them as a unit.

Remove in this Direction

(b) Remove the rear turn signal light bulb from the rear combination light socket and wire.

3. REMOVE REAR COMBINATION LIGHT LED

(a) Disconnect the connector.

(b) Remove the screw.

(c) Turn the rear combination light LED as shown in the illustration to remove it.

Remove in this Direction

4. REMOVE REAR COMBINATION LIGHT GASKET

(a) Remove the rear combination light gasket.

NOTICE:

After the rear combination light gasket is removed, be sure to replace it with a new one. Failure to do so may cause water ingress.

5. REMOVE REAR COMBINATION LIGHT SOCKET AND WIRE

(a) Disengage the clamp to remove the rear combination light socket and wire.

6. REMOVE REAR COMBINATION LIGHT LENS AND BODY