| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM1000000012T85 |
| Model Year Start: 2018 | Model: Camry | Prod Date Range: [03/2017 - ] |
| Title: LIGHTING (EXT): REAR COMBINATION LIGHT ASSEMBLY: INSTALLATION; 2018 - 2024 MY Camry [03/2017 - ] | ||
INSTALLATION
CAUTION / NOTICE / HINT
HINT:
- Use the same procedure for the RH side and LH side.
- The following procedure is for the LH side.
PROCEDURE
1. INSTALL REAR COMBINATION LIGHT ASSEMBLY
(a) Engage the grommet.
(b) Engage the 3 guides and pin to temporarily install the rear combination light assembly as shown in the illustration.
|
*a |
Pin |
|
*b |
Guide |
|
Install in this Direction |
(c) Install the rear combination light assembly with the 2 screws.
(d) Remove the protective tape.
(e) Connect the connector.
2. INSTALL REAR COMBINATION LIGHT COVER
(a) Engage the 2 claws as shown in the illustration.
|
|
Install in this Direction |
(b) Push the areas shown in the illustration in the direction indicated by the arrow to engage the 3 claws and install the rear combination light cover.
|
Area to Push |
|
|
Push in this Direction |
3. INSTALL LUGGAGE COMPARTMENT TRIM INNER COVER LH (for LH Side)
Click here
![2018 - 2019 MY Camry [03/2017 - 09/2019]; DOOR / HATCH: LUGGAGE COMPARTMENT DOOR SUPPORT: INSTALLATION+](/t3Portal/stylegraphics/info.gif)
4. INSTALL LUGGAGE COMPARTMENT TRIM INNER COVER RH (for RH Side)
Click here
5. INSTALL REAR FLOOR FINISH PLATE
Click here
6. INSTALL LUGGAGE COMPARTMENT DOOR STRIKER COVER
Click here
7. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK
Click here
8. INSTALL SPARE WHEEL COVER TRAY
Click here
9. INSTALL SPARE WHEEL COVER ASSEMBLY
Click here
|
|