| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM1000000012T7H |
| Model Year Start: 2018 | Model: Camry | Prod Date Range: [03/2017 - ] |
| Title: LIGHTING (INT): ROOM LIGHT: INSPECTION; 2018 - 2024 MY Camry [03/2017 - ] | ||
INSPECTION
PROCEDURE
1. INSPECT SPOT LIGHT ASSEMBLY (for LED Type)
|
*a |
Component without harness connected (Spot Light Assembly) |
(a) Apply battery voltage to the connector and check that the spot light comes on.
OK:
|
Measurement Condition |
Condition |
Specified Condition |
|---|---|---|
|
Battery positive (+) → 5 (B) Battery negative (-) → 1 (E) |
Spot light switch LH on |
Spot light LH comes on |
|
Spot light switch RH on |
Spot light RH comes on |
|
|
Battery positive (+) → 5 (B) Battery negative (-) → 2 (CTY) |
Spot light switch LH off |
Spot light LH comes on |
|
Spot light switch RH off |
Spot light RH comes on |
If the result is not as specified, replace the spot light assembly.
|
|