Last Modified: 11-20-2023 6.11:8.1.0 Doc ID: RM1000000012T76
Model Year Start: 2018 Model: Camry Prod Date Range: [03/2017 -           ]
Title: LIGHTING (INT): VANITY LIGHT SWITCH: INSPECTION; 2018 - 2024 MY Camry [03/2017 -        ]

INSPECTION

PROCEDURE

1. INSPECT VISOR ASSEMBLY LH

*a

Component without harness connected

(Visor Assembly LH)

*b

Visor up

*c

Visor down

*d

Mirror Cover

(a) Inspect the vanity light switch.

(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

1 - 2

Visor up

10 kΩ or higher

1 - 2

Mirror cover fully closed with visor down

10 kΩ or higher

1 - 2

Mirror cover fully open with visor down

Below 1 Ω

If the result is not as specified, replace the visor assembly LH.

2. INSPECT VISOR ASSEMBLY RH

*a

Component without harness connected

(Visor Assembly RH)

*b

Visor up

*c

Visor down

*d

Mirror Cover

(a) Inspect the vanity light switch.

(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

1 - 2

Visor up

10 kΩ or higher

1 - 2

Mirror cover fully closed with visor down

10 kΩ or higher

1 - 2

Mirror cover fully open with visor down

Below 1 Ω

If the result is not as specified, replace the visor assembly RH.