Last Modified: 11-20-2023 6.11:8.1.0 Doc ID: RM1000000012T6X
Model Year Start: 2018 Model: Camry Prod Date Range: [03/2017 -           ]
Title: BRAKE (REAR): REAR BRAKE (w/o Electric Parking Brake System): DISASSEMBLY; 2018 - 2024 MY Camry [03/2017 -        ]

DISASSEMBLY

PROCEDURE

1. REMOVE CYLINDER BOOT

(a) Using a screwdriver with its tip wrapped with protective tape, remove the rear disc brake piston set ring and cylinder boot from the rear disc brake cylinder.

NOTICE:

Be careful not to damage the rear disc brake piston and rear disc brake cylinder.

*a

Protective Tape

2. REMOVE REAR DISC BRAKE PISTON

(a) Place a piece of cloth between the rear disc brake piston and rear disc brake cylinder.

*a

Cloth

(b) Apply compressed air to remove the rear disc brake piston from the rear disc brake cylinder.

CAUTION:

  • Do not hold the rear disc brake cylinder with any part of your hand between the rear disc brake cylinder and rear disc brake piston.
  • Do not place any part of your hand in front of the rear disc brake piston when using compressed air as a severe injury may result.

NOTICE:

Do not allow any brake fluid to spatter.

3. REMOVE PISTON SEAL

(a) Using a screwdriver with its tip wrapped with protective tape, remove the piston seal from the rear disc brake cylinder.

NOTICE:

Do not damage the inner surface or piston seal groove of the rear disc brake cylinder.

*a

Protective Tape

4. REMOVE REAR DISC BRAKE BLEEDER PLUG CAP

(a) Remove the rear disc brake bleeder plug cap from the rear disc brake bleeder plug.

5. REMOVE REAR DISC BRAKE BLEEDER PLUG

(a) Remove the rear disc brake bleeder plug from the rear disc brake cylinder.