| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM1000000012T3D |
| Model Year Start: 2018 | Model: Camry | Prod Date Range: [03/2017 - ] |
| Title: NETWORKING: CAN COMMUNICATION SYSTEM: B1003; ECU Malfunction; 2018 - 2024 MY Camry [03/2017 - ] | ||
|
DTC |
B1003 |
ECU Malfunction |
DESCRIPTION
|
DTC No. |
Detection Item |
DTC Detection Condition |
Trouble Area |
Note |
|---|---|---|---|---|
|
B1003 |
ECU Malfunction |
A malfunction in the non-volatile storage of the central gateway ECU (network gateway ECU) is detected. |
Central gateway ECU (network gateway ECU) |
- |
PROCEDURE
|
1. |
RECONFIRM DTC OUTPUT |
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / Central Gateway / Trouble Codes.
Body Electrical > Central Gateway > Trouble Codes
|
Result |
Proceed to |
|---|---|
|
DTC B1003 is not output from the central gateway ECU (network gateway ECU) |
A |
|
DTC B1003 is output from the central gateway ECU (network gateway ECU) |
B |
| A |
|
USE SIMULATION METHOD TO CHECK
|
![2018 MY Camry [03/2017 - 06/2017]; INTRODUCTION: HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS: HOW TO PROCEED WITH TROUBLESHOOTING](/t3Portal/stylegraphics/info.gif)
| B |
|
REPLACE CENTRAL GATEWAY ECU (NETWORK GATEWAY ECU)
|
|
|