| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM1000000012T0V |
| Model Year Start: 2018 | Model: Camry | Prod Date Range: [03/2017 - ] |
| Title: UB80E (AUTOMATIC TRANSMISSION / TRANSAXLE): TRANSMISSION CONTROL CABLE: ADJUSTMENT; 2018 - 2024 MY Camry [03/2017 - ] | ||
ADJUSTMENT
PROCEDURE
1. SECURE VEHICLE
(a) Fully apply the parking brake and chock a wheel.
CAUTION:
- Make sure to apply the parking brake and chock a wheel before performing this procedure.
- If the vehicle is not secure and the shift lever is moved to N, the vehicle may suddenly move, possibly resulting in an accident or serious injury.
2. REMOVE CONSOLE BOX ASSEMBLY
Click here
![2018 MY Camry [03/2017 - 06/2017]; INTERIOR PANELS / TRIM: FRONT CONSOLE BOX: REMOVAL](/t3Portal/stylegraphics/info.gif)
3. ADJUST SHIFT LEVER POSITION
NOTICE:
Before adjusting the transmission control cable assembly, check that the park/neutral position switch assembly and shift lever are in N.
|
(a) Disconnect the transmission control cable assembly from the transmission floor shift assembly. |
|
|
(b) Slide the slider of the transmission control cable assembly in the direction indicated by the arrow in the illustration and pull the lock piece outward. |
|
|
(c) Connect the transmission control cable assembly to the transmission floor shift assembly. NOTICE:
|
|
(d) Push the lock piece into the adjuster case.
|
*a |
Lock Piece |
|
*b |
Push in |
|
*c |
Adjuster Case |
NOTICE:
- Check that the park/neutral position switch assembly and shift lever are in N.
- Securely push in the lock piece until the slider lock is engaged.
-
When pushing in the lock piece of the adjuster case to lock it, remove your hand from the lever shaft.
*1
Transmission Control Cable Assembly
*a
Lever Shaft
- When pushing in the lock piece of the adjuster case to lock it, do not move the lever shaft or transmission control cable assembly forward or backward.
(e) After adjusting the shift lever position, check the position and operation of the shift lever. If there is a problem, adjust the shift lever position again.
4. INSTALL CONSOLE BOX ASSEMBLY
Click here
|
|