Last Modified: 11-20-2023 6.11:8.1.0 Doc ID: RM1000000012T0R
Model Year Start: 2018 Model: Camry Prod Date Range: [03/2017 - 09/2019]
Title: UB80E (AUTOMATIC TRANSMISSION / TRANSAXLE): OIL COOLER: INSTALLATION; 2018 - 2019 MY Camry [03/2017 - 09/2019]

INSTALLATION

PROCEDURE

1. INSTALL TRANSMISSION OIL COOLER

(a) Engage the hook and temporarily install the transmission oil cooler to the automatic transaxle case sub-assembly with the bolt (A).

(b) Install the bolt (B).

Torque:

13.5 N·m {138 kgf·cm, 10 ft·lbf}

(c) Install the bolt (C).

Torque:

13.5 N·m {138 kgf·cm, 10 ft·lbf}

(d) Fully tighten the bolt (A) to install the transmission oil cooler.

Torque:

13.5 N·m {138 kgf·cm, 10 ft·lbf}

2. CONNECT WATER BY-PASS HOSE ASSEMBLY

(a) Connect the water by-pass hose assembly to the transmission oil cooler and slide the clip to secure it.

*a

2 to 7 mm (0.0787 to 0.276 in.)

*b

Paint Mark

*c

45° (Claw of Clip Location)

-

-

NOTICE:

  • Make sure to slide the water by-pass hose assembly until it contacts the hose stopper of the transmission oil cooler.
  • Make sure to align the paint mark of the water by-pass hose assembly with the paint mark of the transmission oil cooler.
  • Make sure that the claws of the clip are within the location shown in the illustration.

3. CONNECT NO. 1 WATER BY-PASS HOSE

(a) Connect the No. 1 water by-pass hose to the transmission oil cooler and slide the clip to secure it.

*a

2 to 7 mm (0.0787 to 0.276 in.)

*b

Paint Mark

*c

45° (Claw of Clip Location)

-

-

NOTICE:

  • Make sure to slide the No. 1 water by-pass hose until it contacts the hose stopper of the transmission oil cooler.
  • Make sure to align the paint mark of the No. 1 water by-pass hose with the paint mark of the transmission oil cooler.
  • Make sure that the claws of the clip are within the location shown in the illustration.

(b) Engage the 3 clamps to install the transmission breather clamp.

4. INSTALL NO. 1 OIL COOLER TUBE SUB-ASSEMBLY WITHOUT HOSE

(a) Install the inlet No. 1 oil cooler hose, inlet No. 2 oil cooler hose, outlet No. 1 oil cooler hose and outlet No. 2 oil cooler hose to the No. 1 oil cooler tube sub-assembly without hose and slide the 4 clips to secure them.

*1

No. 1 Oil Cooler Tube Sub-assembly without Hose

*2

Inlet No. 1 Oil Cooler Hose

*3

Inlet No. 2 Oil Cooler Hose

*4

Outlet No. 1 Oil Cooler Hose

*5

Outlet No. 2 Oil Cooler Hose

-

-

*a

2 to 7 mm (0.0787 to 0.276 in.)

*b

45° (Claw of Clip Location)

*c

0 to 3 mm (0 to 0.118 in.)

-

-

NOTICE:

  • Make sure to slide the inlet No. 1 oil cooler hose, inlet No. 2 oil cooler hose, outlet No. 1 oil cooler hose and outlet No. 2 oil cooler hose until each contacts the hose stopper of the No. 1 oil cooler tube sub-assembly without hose.
  • Make sure that the claws of each clip are within the location shown in the illustration.

(b) Connect the outlet No. 2 oil cooler hose to the transmission oil cooler and slide the clip to secure it.

NOTICE:

  • Make sure to slide the outlet No. 2 oil cooler hose until it contacts the hose stopper of the transmission oil cooler.
  • Make sure to align the paint mark of the outlet No. 2 oil cooler hose with paint mark of the transmission oil cooler.
  • Make sure that the claws of the clip are within the location shown in the illustration.

*a

0 to 3 mm (0 to 0.118 in.)

*b

2 to 7 mm (0.0787 to 0.276 in.)

*c

Paint Mark

*d

45° (Claw of Clip Location)

(c) Connect the inlet No. 2 oil cooler hose to the transmission oil cooler and slide the clip to secure it.

NOTICE:

  • Make sure to slide the inlet No. 2 oil cooler hose until it contacts the hose stopper of the transmission oil cooler.
  • Make sure to align the paint mark of the inlet No. 2 oil cooler hose with the paint mark of the transmission oil cooler.
  • Make sure that the claws of the clip are within the location shown in the illustration.

*a

0 to 3 mm (0 to 0.118 in.)

*b

2 to 7 mm (0.0787 to 0.276 in.)

*c

Paint Mark

*d

45° (Claw of Clip Location)

(d) Temporarily install the No. 1 oil cooler tube sub-assembly without hose to the automatic transaxle case sub-assembly with the 2 bolts.

(e) Using SST, tighten the bolt (A).

SST: 09961-00950

Torque:

Specified tightening torque :

13.5 N·m {138 kgf·cm, 10 ft·lbf}

HINT:

  • Calculate the torque wrench reading when changing the fulcrum length of the torque wrench.

    Click here 2018 MY Camry [03/2017 - 06/2017]; INTRODUCTION: REPAIR INSTRUCTION: PRECAUTION 2018 - 2019 MY Camry [06/2017 - 09/2019]; INTRODUCTION: REPAIR INSTRUCTION: PRECAUTION

  • When using SST (fulcrum length of 150 mm (5.91 in.)) + torque wrench (fulcrum length of 162 mm (6.38 in.)):

    7.0 N*m (71 kgf*cm, 62 in.*lbf)

*a

Torque Wrench Fulcrum Length

*b

Bolt (A)

*c

Bolt (B)

(f) Tighten the bolt (B).

Torque:

13.5 N·m {138 kgf·cm, 10 ft·lbf}

5. CONNECT INLET NO. 1 OIL COOLER HOSE

(a) Connect the inlet No. 1 oil cooler hose to the No. 1 oil cooler outlet tube sub-assembly and slide the clip to secure it.

NOTICE:

Make sure to slide the inlet No. 1 oil cooler hose until it contacts the hose stopper of the No. 1 oil cooler outlet tube sub-assembly.

*a

0 to 3 mm (0 to 0.118 in.)

*b

2 to 7 mm (0.0787 to 0.276 in.)

6. CONNECT OUTLET NO. 1 OIL COOLER HOSE

(a) Connect the outlet No. 1 oil cooler hose to the oil cooler union sub-assembly and slide the clip to secure it.

NOTICE:

  • Make sure to slide the outlet No. 1 oil cooler hose until it contacts the hose stopper of the oil cooler union sub-assembly.
  • Make sure that the paint mark of the outlet No. 1 oil cooler hose is within the location shown in the illustration.

*a

0 to 3 mm (0 to 0.118 in.)

*b

2 to 7 mm (0.0787 to 0.276 in.)

*c

Paint Mark (Left Side of Vehicle)

*d

30° (Paint Mark Location)

7. INSTALL BATTERY CLAMP SUB-ASSEMBLY

Click here 2018 MY Camry [03/2017 - 06/2017]; A25A-FKS (ENGINE MECHANICAL): ENGINE ASSEMBLY: INSTALLATION+ 2018 MY Camry [06/2017 - 08/2018]; A25A-FKS (ENGINE MECHANICAL): ENGINE ASSEMBLY: INSTALLATION+ 2019 - 2020 MY Camry [08/2018 - 03/2020]; A25A-FKS (ENGINE MECHANICAL): ENGINE ASSEMBLY: INSTALLATION+

8. INSTALL ECM

Click here 2018 - 2024 MY Camry [03/2017 -        ]; A25A-FKS (ENGINE CONTROL): ECM: INSTALLATION

9. INSTALL BATTERY

Click here 2018 MY Camry [03/2017 - 08/2018]; MAINTENANCE: A25A-FKS BATTERY: INSTALLATION 2019 - 2024 MY Camry [08/2018 -        ]; MAINTENANCE: A25A-FKS BATTERY: INSTALLATION

10. ADD ENGINE COOLANT

Click here 2018 MY Camry [03/2017 - 06/2017]; MAINTENANCE: A25A-FKS COOLANT: REPLACEMENT+ 2018 MY Camry [06/2017 - 08/2018]; MAINTENANCE: A25A-FKS COOLANT: REPLACEMENT+ 2019 - 2024 MY Camry [08/2018 -        ]; MAINTENANCE: A25A-FKS COOLANT: REPLACEMENT+

11. ADJUST AUTOMATIC TRANSAXLE FLUID

Click here 2018 MY Camry [03/2017 - 08/2018]; UB80E (AUTOMATIC TRANSMISSION / TRANSAXLE): AUTOMATIC TRANSAXLE FLUID: ADJUSTMENT 2019 MY Camry [08/2018 - 09/2019]; UB80E (AUTOMATIC TRANSMISSION / TRANSAXLE): AUTOMATIC TRANSAXLE FLUID: ADJUSTMENT

12. INSPECT FOR OIL LEAK

13. INSPECT FOR COOLANT LEAK

Click here 2018 MY Camry [03/2017 - 06/2017]; A25A-FKS (COOLING): COOLING SYSTEM: ON-VEHICLE INSPECTION+ 2018 MY Camry [06/2017 - 08/2018]; A25A-FKS (COOLING): COOLING SYSTEM: ON-VEHICLE INSPECTION+ 2019 - 2024 MY Camry [08/2018 -        ]; A25A-FKS (COOLING): COOLING SYSTEM: ON-VEHICLE INSPECTION+

14. INSTALL FRONT FENDER APRON SEAL LH

Click here 2018 MY Camry [03/2017 - 06/2017]; A25A-FKS (ENGINE MECHANICAL): ENGINE ASSEMBLY: INSTALLATION+ 2018 MY Camry [06/2017 - 08/2018]; A25A-FKS (ENGINE MECHANICAL): ENGINE ASSEMBLY: INSTALLATION+ 2019 - 2020 MY Camry [08/2018 - 03/2020]; A25A-FKS (ENGINE MECHANICAL): ENGINE ASSEMBLY: INSTALLATION+

15. INSTALL NO. 2 ENGINE UNDER COVER ASSEMBLY

Click here 2018 MY Camry [03/2017 - 06/2017]; A25A-FKS (ENGINE MECHANICAL): ENGINE ASSEMBLY: INSTALLATION+ 2018 MY Camry [06/2017 - 08/2018]; A25A-FKS (ENGINE MECHANICAL): ENGINE ASSEMBLY: INSTALLATION+ 2019 - 2020 MY Camry [08/2018 - 03/2020]; A25A-FKS (ENGINE MECHANICAL): ENGINE ASSEMBLY: INSTALLATION+

16. INSTALL NO. 1 ENGINE UNDER COVER

Click here 2018 MY Camry [03/2017 - 06/2017]; A25A-FKS (ENGINE MECHANICAL): ENGINE ASSEMBLY: INSTALLATION+ 2018 MY Camry [06/2017 - 08/2018]; A25A-FKS (ENGINE MECHANICAL): ENGINE ASSEMBLY: INSTALLATION+ 2019 - 2020 MY Camry [08/2018 - 03/2020]; A25A-FKS (ENGINE MECHANICAL): ENGINE ASSEMBLY: INSTALLATION+

17. INSTALL FRONT WHEEL OPENING EXTENSION PAD LH

Click here 2018 MY Camry [03/2017 - 06/2017]; A25A-FKS (ENGINE MECHANICAL): ENGINE ASSEMBLY: INSTALLATION+ 2018 MY Camry [06/2017 - 08/2018]; A25A-FKS (ENGINE MECHANICAL): ENGINE ASSEMBLY: INSTALLATION+ 2019 - 2020 MY Camry [08/2018 - 03/2020]; A25A-FKS (ENGINE MECHANICAL): ENGINE ASSEMBLY: INSTALLATION+

18. INSTALL FRONT WHEEL OPENING EXTENSION PAD RH

Click here 2018 MY Camry [03/2017 - 06/2017]; A25A-FKS (ENGINE MECHANICAL): ENGINE ASSEMBLY: INSTALLATION+ 2018 MY Camry [06/2017 - 08/2018]; A25A-FKS (ENGINE MECHANICAL): ENGINE ASSEMBLY: INSTALLATION+ 2019 - 2020 MY Camry [08/2018 - 03/2020]; A25A-FKS (ENGINE MECHANICAL): ENGINE ASSEMBLY: INSTALLATION+

19. INSTALL FRONT WHEEL LH

Click here 2018 MY Camry [03/2017 - 06/2017]; MAINTENANCE: TIRE AND WHEEL: INSTALLATION+ 2018 - 2024 MY Camry [06/2017 -        ]; MAINTENANCE: TIRE AND WHEEL: INSTALLATION+