- Register transmitter code
- Rolling code systems
| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM1000000012SWX |
| Model Year Start: 2018 | Model: Camry | Prod Date Range: [03/2017 - 06/2017] |
| Title: MIRROR (INT): INNER REAR VIEW MIRROR (w/ EC Mirror): REMOVAL; 2018 MY Camry [03/2017 - 06/2017] | ||
REMOVAL
CAUTION / NOTICE / HINT
The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during inner rear view mirror assembly removal/installation are shown below.
Necessary Procedures After Procedure Performed
|
Replaced Part or Performed Procedure |
Necessary Procedure |
Effect/Inoperative Function when Necessary Procedure not Performed |
Link |
|---|---|---|---|
|
Replacement of inner rear view mirror assembly |
Re-registration of codes in the garage door opener system |
Garage door opener system |
|
PROCEDURE
1. REMOVE INNER REAR VIEW MIRROR STAY HOLDER COVER (w/o Pre-collision System)
(a) Disengage the 2 guides and slide the inner rear view mirror stay holder cover as shown in the illustration.
|
Slide |
(b) Disengage the 6 claws to remove the inner rear view mirror stay holder cover as shown in the illustration.
|
|
Remove in this Direction |
2. REMOVE INNER REAR VIEW MIRROR ASSEMBLY (w/o Pre-collision System)
|
(a) Disconnect the connector. |
|
(b) Using a T20 "TORX" socket wrench, remove the screw.
(c) Slide the inner rear view mirror assembly as shown in the illustration to remove it.
|
|
Remove in this Direction |
3. REMOVE NO. 2 FORWARD RECOGNITION COVER (w/ Pre-collision System)
Click here
![2018 - 2020 MY Camry [03/2017 - 10/2020]; CRUISE CONTROL: FRONT CAMERA: REMOVAL+](/t3Portal/stylegraphics/info.gif)
4. REMOVE NO. 1 FORWARD RECOGNITION COVER (w/ Pre-collision System)
Click here
5. REMOVE INNER REAR VIEW MIRROR ASSEMBLY (w/ Pre-collision System)
|
(a) Disconnect the connector. |
|
(b) Disengage the clamp.
(c) Using a T20 "TORX" socket wrench, remove the screw.
(d) Slide the inner rear view mirror assembly as shown in the illustration to remove it.
|
|
Remove in this Direction |
|
|