| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM1000000012ST7 |
| Model Year Start: 2018 | Model: Camry | Prod Date Range: [03/2017 - 06/2017] |
| Title: INTERIOR PANELS / TRIM: FRONT CONSOLE BOX: INSTALLATION; 2018 MY Camry [03/2017 - 06/2017] | ||
INSTALLATION
PROCEDURE
1. INSTALL CONSOLE BOX ASSEMBLY
(a) Install the console box assembly with the 4 bolts and 2 screws.
2. INSTALL CONSOLE BOX CARPET
(a) Install the console box carpet as shown in the illustration.
|
Install in this Direction |
3. INSTALL CONSOLE REAR END PANEL SUB-ASSEMBLY
(a) Engage the 6 claws and 4 clips to install the console rear end panel sub-assembly as shown in the illustration.
|
|
Install in this Direction |
4. INSTALL INSTRUMENT PANEL CUP HOLDER
(a) Engage the 2 claws.
(b) Install the instrument panel cup holder with the 3 screws.
5. INSTALL FRONT CONSOLE BOX INSERT SUB-ASSEMBLY
(a) Install the front console box insert sub-assembly with the 5 screws.
6. INSTALL SHIFT POSITION INDICATOR
Click here
![2018 - 2024 MY Camry [03/2017 - ]; UB80E (AUTOMATIC TRANSMISSION / TRANSAXLE): SHIFT LEVER: REASSEMBLY+](/t3Portal/stylegraphics/info.gif)
7. INSTALL REAR UPPER CONSOLE PANEL SUB-ASSEMBLY
(a) Connect each connector.
(b) Engage the clamp.
(c) Engage the 6 clips and 7 claws to install the rear upper console panel sub-assembly as shown in the illustration.
|
|
Install in this Direction |
(d) Move the shift lever to P.
8. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY
Click here
9. INSTALL SHIFT LOCK RELEASE BUTTON COVER
Click here
10. INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL
(a) Connect each connector.
(b) Engage the clamp.
(c) Engage the 7 clips to install the lower center instrument panel finish panel as shown in the illustration.
|
|
Install in this Direction |
11. INSTALL INSTRUMENT PANEL FINISH PLATE GARNISH
(a) Engage the 2 guides, claw and clip to install the instrument panel finish plate garnish as shown in the illustration.
|
|
Install in this Direction |
12. INSTALL NO. 2 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY
(a) Engage the 11 clips to install the No. 2 instrument panel garnish sub-assembly as shown in the illustration.
|
|
Install in this Direction |
13. INSTALL NO. 1 METER HOOD CLUSTER
(a) Connect the connector.
(b) Engage the 3 guides and 7 clips to install the No. 1 meter hood cluster as shown in the illustration.
|
|
Install in this Direction |
|
|