| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM1000000012SSR |
| Model Year Start: 2018 | Model: Camry | Prod Date Range: [03/2017 - ] |
| Title: MIRROR (EXT): OUTER REAR VIEW MIRROR GLASS: INSPECTION; 2018 - 2024 MY Camry [03/2017 - ] | ||
INSPECTION
PROCEDURE
1. INSPECT OUTER MIRROR RH
|
(a) Check the outer mirror heater operation. (w/ Mirror Heater) (1) Measure the resistance according to the value(s) in the table below. Standard Resistance:
If the result is not as specified, replace the outer mirror RH. |
|
(b) Check the operation of the outer rear view mirror indicator. (w/ Blind Spot Monitor System)
NOTICE:
Do not apply a voltage of more than 6 V.
(1) Connect 4 new 1.5 V dry-cell batteries in series.
|
(2) Apply 4.5 V battery voltage to the terminals of the connector, and check that the outer rear view mirror indicator comes on. OK:
If the result is not as specified, replace the outer mirror RH. |
|
2. INSPECT OUTER MIRROR LH
|
(a) Check the outer mirror heater operation. (1) Measure the resistance according the value(s) in the table below. (w/ Mirror Heater) Standard Resistance:
If the result is not as specified, replace the outer mirror LH. |
|
(b) Check the operation of the outer rear view mirror indicator. (w/ Blind Spot Monitor System)
NOTICE:
Do not apply a voltage of more than 6 V.
(1) Connect 4 new 1.5 V dry-cell batteries in series.
|
(2) Apply 4.5 V battery voltage to the terminals of the connector, and check that the outer rear view mirror indicator comes on. OK:
If the result is not as specified, replace the outer mirror LH. |
|
|
|