Last Modified: 11-20-2023 6.11:8.1.0 Doc ID: RM1000000012SQR
Model Year Start: 2018 Model: Camry Prod Date Range: [03/2017 -           ]
Title: SUPPLEMENTAL RESTRAINT SYSTEMS: CENTER AIRBAG SENSOR ASSEMBLY: ON-VEHICLE INSPECTION; 2018 - 2024 MY Camry [03/2017 -        ]

ON-VEHICLE INSPECTION

CAUTION / NOTICE / HINT

CAUTION:

Be sure to correctly follow the removal and installation procedures for the airbag sensor assembly.

PROCEDURE

1. INSPECT AIRBAG SENSOR ASSEMBLY (for Vehicle not Involved in Collision)

(a) Perform a diagnostic system check.

Click here 2018 - 2024 MY Camry [03/2017 -        ]; SUPPLEMENTAL RESTRAINT SYSTEMS: AIRBAG SYSTEM: DTC CHECK / CLEAR

2. INSPECT AIRBAG SENSOR ASSEMBLY (for Vehicle Involved in Collision and Airbag not Deployed)

(a) Perform a diagnostic system check.

Click here 2018 - 2024 MY Camry [03/2017 -        ]; SUPPLEMENTAL RESTRAINT SYSTEMS: AIRBAG SYSTEM: DTC CHECK / CLEAR

(b) Visually check for defects with the airbag sensor assembly installed to the vehicle.

HINT:

The defects are as follows:

  • Cracks in the sensor housing
  • Dents in the sensor housing
  • Chips in the sensor housing
  • Cracks or other damage to the connectors
  • Peeling of the label

OK:

No defects are found.

If any defects are found, replace the airbag sensor assembly with a new one.

3. INSPECT AIRBAG SENSOR ASSEMBLY (for Vehicle Involved in Collision and Airbag is Deployed)

(a) Replace the airbag sensor assembly.

HINT:

The airbag sensor assembly should be replaced after any of the SRS parts has deployed, as it has been subjected to an impact.