| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM1000000012SQF |
| Model Year Start: 2018 | Model: Camry | Prod Date Range: [03/2017 - 09/2019] |
| Title: SUPPLEMENTAL RESTRAINT SYSTEMS: FRONT SEAT SIDE AIRBAG ASSEMBLY (for TMC Made): ON-VEHICLE INSPECTION; 2018 - 2019 MY Camry [03/2017 - 09/2019] | ||
ON-VEHICLE INSPECTION
CAUTION / NOTICE / HINT
CAUTION:
Be sure to correctly follow the removal and installation procedures for the front seat airbag assemblies.
PROCEDURE
1. INSPECT FRONT SEAT AIRBAG ASSEMBLY (for Vehicle not Involved in Collision)
(a) Perform a diagnostic system check.
Click here
![2018 - 2024 MY Camry [03/2017 - ]; SUPPLEMENTAL RESTRAINT SYSTEMS: AIRBAG SYSTEM: DTC CHECK / CLEAR](/t3Portal/stylegraphics/info.gif)
(b) Visually check for defects with the front seat airbag assemblies installed to the vehicle.
HINT:
The defects are as follows:
- Scratches, broken or frayed threads on the surface of the front seatback assembly around the front seat airbag assemblies
- Small cracks in the front seatback assembly around the front seat airbag assemblies
- Significant discoloration on the front seatback assembly around the front seat airbag assemblies
OK:
No defects are found.
If any defects are found, replace the separate type front seatback pad or separate type front seatback cover with a new one.
2. INSPECT FRONT SEAT AIRBAG ASSEMBLY (for Vehicle Involved in Collision and Airbag not Deployed)
(a) Perform a diagnostic system check.
Click here
(b) Visually check for defects with the front seat airbag assemblies removed from the vehicle.
HINT:
The defects are as follows:
- Scratches, broken or frayed threads on the surface of the base fabric of the front seat airbag assemblies
- Marks from being dropped
- Deformation of the installation surface of the front seat airbag assemblies
- Cracks or other damage to the wire harness or connector
OK:
No defects are found.
If any defects are found, replace the front seat airbag assembly with a new one.
|
|