| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM1000000012SO0 |
| Model Year Start: 2018 | Model: Camry | Prod Date Range: [03/2017 - ] |
| Title: SUPPLEMENTAL RESTRAINT SYSTEMS: AIRBAG SYSTEM: HOW TO PROCEED WITH TROUBLESHOOTING; 2018 - 2024 MY Camry [03/2017 - ] | ||
|
HOW TO PROCEED WITH TROUBLESHOOTING |
CAUTION / NOTICE / HINT
HINT:
- Use the following procedure to troubleshoot the airbag system.
- *: Use the Techstream.
PROCEDURE
|
1. |
VEHICLE BROUGHT TO WORKSHOP |
|
|
2. |
CUSTOMER PROBLEM ANALYSIS |
(a) Confirm problem symptoms.
Click here
![2018 MY Camry [03/2017 - 06/2017]; INTRODUCTION: HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS: HOW TO PROCEED WITH TROUBLESHOOTING](/t3Portal/stylegraphics/info.gif)
|
|
3. |
CHECK CAN COMMUNICATION SYSTEM* |
(a) Using the Techstream, check if the CAN communication system is functioning normally.
OK:
CAN communication system is functioning normally.
HINT:
-
Refer to Communication Bus Check in CAN Communication System.
Click here
- The airbag sensor assembly is connected to the CAN communication system. Therefore, before starting troubleshooting, make sure to check that there are no malfunctions in the CAN communication system.
| NG |
|
|
|
4. |
SRS WARNING LIGHT CHECK |
(a) Proceed to Operation Check.
Click here
|
|
5. |
CHECK FOR DTC* |
(a) Proceed to DTC Check / Clear.
Body Electrical > SRS Airbag > Trouble Codes
OK:
DTCs are not output.
| NG |
|
|
|
6. |
SYMPTOM SIMULATION |
(a) Proceed to How to Proceed with Troubleshooting.
Click here
|
|
7. |
PROBLEM SYMPTOMS TABLE |
(a) Proceed to Problem Symptoms Table.
Click here
|
|
8. |
CIRCUIT INSPECTION* |
|
|
9. |
IDENTIFICATION OF PROBLEM |
|
|
10. |
REPAIR OR REPLACEMENT |
|
|
11. |
CONFIRMATION TEST |
| NEXT |
|
END |
|
12. |
DIAGNOSTIC TROUBLE CODE CHART |
(a) Proceed to Diagnostic Trouble Code Chart.
Click here
|
|
13. |
CIRCUIT INSPECTION* |
|
|
14. |
IDENTIFICATION OF PROBLEM |
|
|
15. |
REPAIR OR REPLACEMENT |
|
|
16. |
CONFIRMATION TEST |
| NEXT |
|
END |
|
|