| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM1000000012SLZ |
| Model Year Start: 2018 | Model: Camry | Prod Date Range: [03/2017 - ] |
| Title: HEATING / AIR CONDITIONING: FRONT EVAPORATOR TEMPERATURE SENSOR: INSPECTION; 2018 - 2024 MY Camry [03/2017 - ] | ||
INSPECTION
PROCEDURE
1. INSPECT NO. 1 COOLER THERMISTOR
(a) Measure the resistance according to the value(s) in the table below.
|
*a |
Component without harness connected (No. 1 Cooler Thermistor) |
*b |
Sensing Portion |
|
*c |
Resistance (kΩ) |
*d |
Temperature (°C (°F)) |
|
*e |
Allowable Range |
- |
- |
Standard Resistance:
|
Tester Connection |
Condition |
Specified Condition |
|---|---|---|
|
1 - 2 |
-10°C (14°F) |
7.30 to 9.10 kΩ |
|
-5°C (23°F) |
5.65 to 6.95 kΩ |
|
|
0°C (32°F) |
4.40 to 5.35 kΩ |
|
|
5°C (41°F) |
3.40 to 4.15 kΩ |
|
|
10°C (50°F) |
2.70 to 3.25 kΩ |
|
|
15°C (59°F) |
2.14 to 2.58 kΩ |
|
|
20°C (68°F) |
1.71 to 2.05 kΩ |
|
|
25°C (77°F) |
1.38 to 1.64 kΩ |
|
|
30°C (86°F) |
1.11 to 1.32 kΩ |
If the resistance is not as specified, replace the No. 1 cooler thermistor.
NOTICE:
- Hold the sensor only by its connector. Touching the sensing portion may change the resistance value.
- When measuring, the sensor temperature must be the same as the ambient temperature.
HINT:
As the temperature increases, the resistance decreases (see the graph).
|
|