| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM1000000012SL3 |
| Model Year Start: 2018 | Model: Camry | Prod Date Range: [03/2017 - 10/2020] |
| Title: HEATING / AIR CONDITIONING: AIR CONDITIONING UNIT: DISASSEMBLY; 2018 - 2020 MY Camry [03/2017 - 10/2020] | ||
DISASSEMBLY
PROCEDURE
1. REMOVE NO. 2 AIR DUCT
(a) Remove the screw.
|
*a |
View A |
|
Front |
(b) Disengage the 3 claws to remove the No. 2 air duct.
NOTICE:
Be careful not to deform or damage the lower heater case of the air conditioner unit assembly when removing the No. 2 air duct.
2. REMOVE GROMMET (for Manual Air Conditioning System)
|
(a) Disengage the 2 claws to remove the grommet. |
|
3. REMOVE ASPIRATOR (for Automatic Air Conditioning System)
|
(a) Disengage the guide and 2 claws to remove the aspirator. |
|
4. REMOVE BLOWER ASSEMBLY
Click here
![2018 MY Camry [03/2017 - 06/2017]; HEATING / AIR CONDITIONING: BLOWER UNIT: REMOVAL+](/t3Portal/stylegraphics/info.gif)
5. REMOVE AIR CONDITIONING AMPLIFIER ASSEMBLY
(a) Disconnect the connector.
|
Remove in this Direction |
(b) Remove the screw.
(c) Disengage the guide to remove the air conditioning amplifier assembly as shown in the illustration.
6. REMOVE AIR CONDITIONING HARNESS ASSEMBLY
(a) for Single Type:
|
(1) Disconnect each connector. |
|
(2) Disengage each clamp to remove the air conditioning harness assembly.
(b) for Dual Type:
|
(1) Disconnect each connector. |
|
(2) Disengage each clamp to remove the air conditioning harness assembly.
7. REMOVE HEATER COVER
(a) Remove the screw.
|
|
Remove in this Direction |
(b) Remove the heater cover as shown in the illustration.
8. REMOVE DRAIN COOLER HOSE
|
(a) Remove the drain cooler hose. |
|
9. REMOVE NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY
|
(a) Remove the 3 screws and No. 1 air conditioning radiator damper servo sub-assembly. |
|
10. REMOVE NO. 2 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY (for Dual Type)
|
(a) Remove the 2 screws and No. 2 air conditioning radiator damper servo sub-assembly. |
|
11. REMOVE HEATER PIPE GROMMET
|
(a) Remove the heater pipe grommet. |
|
12. REMOVE HEATER CLAMP
|
(a) Disengage the 3 claws to remove the heater clamp. |
|
13. REMOVE HEATER RADIATOR UNIT SUB-ASSEMBLY
|
|
Remove in this Direction |
(a) Remove the heater radiator unit sub-assembly as shown in the illustration.
NOTICE:
Prepare a drain pan or cloth in case the coolant leaks.
14. REMOVE GROMMET SUB-ASSEMBLY
|
(a) Remove the grommet sub-assembly. |
|
15. REMOVE COOLER EXPANSION VALVE
|
(a) Using a 4 mm hexagon socket wrench, remove the 2 hexagon bolts and cooler expansion valve. |
|
(b) Remove the 2 O-rings from the No. 1 cooler evaporator sub-assembly.
16. REMOVE NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY
(a) Remove the 2 screws.
(b) Disengage the 10 claws to remove the upper heater case with No. 1 cooler evaporator sub-assembly from the lower heater case.
|
(c) Disengage the clamp. |
|
(d) Remove the No. 1 cooler evaporator sub-assembly with No. 1 cooler thermistor from the upper heater case.
17. REMOVE NO. 1 COOLER THERMISTOR
Click here
|
|