| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM1000000012SFI |
| Model Year Start: 2018 | Model: Camry | Prod Date Range: [03/2017 - 06/2017] |
| Title: PARKING BRAKE: PARKING BRAKE SWITCH: REMOVAL; 2018 MY Camry [03/2017 - 06/2017] | ||
REMOVAL
CAUTION / NOTICE / HINT
The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during parking brake switch assembly removal/installation are shown below.
Necessary Procedures After Parts Removed/Installed/Replaced
|
Replaced Part or Performed Procedure |
Necessary Procedure |
Effect/Inoperative Function when Necessary Procedure not Performed |
Link |
|---|---|---|---|
|
Disconnect cable from negative battery terminal |
Perform steering sensor zero point calibration |
Lane departure alert system (w/ Steering Control) |
|
|
Pre-collision system |
|||
|
Memorize steering angle neutral point |
Parking assist monitor system |
|
PROCEDURE
1. SEPARATE PARKING BRAKE PEDAL ASSEMBLY
Click here
![2018 MY Camry [03/2017 - 06/2017]; PARKING BRAKE: PARKING BRAKE PEDAL: REMOVAL](/t3Portal/stylegraphics/info.gif)
2. REMOVE PARKING BRAKE SWITCH ASSEMBLY
|
(a) Remove the screw and parking brake switch assembly from the parking brake pedal assembly. |
|
|
|