Last Modified: 11-20-2023 6.11:8.1.0 Doc ID: RM1000000012SEN
Model Year Start: 2018 Model: Camry Prod Date Range: [03/2017 -           ]
Title: AXLE AND DIFFERENTIAL: REAR AXLE HUB (for 2WD without Electric Parking Brake System): REMOVAL; 2018 - 2024 MY Camry [03/2017 -        ]

REMOVAL

CAUTION / NOTICE / HINT

HINT:

  • Use the same procedure for the RH side and LH side.
  • The following procedure is for the LH side.

PROCEDURE

1. REMOVE REAR WHEEL

Click here 2018 MY Camry [03/2017 - 06/2017]; MAINTENANCE: TIRE AND WHEEL: REMOVAL+ 2018 - 2024 MY Camry [06/2017 -        ]; MAINTENANCE: TIRE AND WHEEL: REMOVAL+

2. SEPARATE REAR DISC BRAKE CALIPER ASSEMBLY

Click here 2018 - 2024 MY Camry [03/2017 -        ]; AXLE AND DIFFERENTIAL: REAR AXLE HUB BOLT(w/o Electric Parking Brake System): REPLACEMENT+

3. REMOVE PARKING BRAKE SHOE ADJUSTING HOLE PLUG

Click here 2018 - 2024 MY Camry [03/2017 -        ]; BRAKE (REAR): REAR BRAKE (w/o Electric Parking Brake System): REMOVAL+

4. REMOVE REAR DISC

Click here 2018 - 2024 MY Camry [03/2017 -        ]; BRAKE (REAR): REAR BRAKE (w/o Electric Parking Brake System): REMOVAL+

5. DISCONNECT SKID CONTROL SENSOR WIRE

(a) Using a screwdriver with its tip wrapped with protective tape, disconnect the skid control sensor wire connector from the rear axle hub and bearing assembly.

NOTICE:

Be careful not to damage the rear axle hub and bearing assembly or connector cover.

*a

Protective Tape

6. REMOVE REAR AXLE HUB AND BEARING ASSEMBLY

(a) Remove the 4 bolts and rear axle hub and bearing assembly from the rear axle carrier sub-assembly.