| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM1000000012SCS |
| Model Year Start: 2018 | Model: Camry | Prod Date Range: [03/2017 - ] |
| Title: WIPER / WASHER: WIPER AND WASHER SYSTEM: B1370; ECU Malfunction; 2018 - 2024 MY Camry [03/2017 - ] | ||
|
DTC |
B1370 |
ECU Malfunction |
DESCRIPTION
This DTC is stored when the windshield wiper motor assembly detects an internal malfunction.
|
DTC No. |
Detection Item |
DTC Detection Condition |
Trouble Area |
Memory |
DTC Output from |
|---|---|---|---|---|---|
|
B1370 |
ECU Malfunction |
Detection condition:
Malfunction Status:
Malfunction Time:
|
Windshield wiper motor assembly |
○ |
Wiper |
PROCEDURE
|
1. |
CLEAR DTC |
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / Main Body / Trouble Codes.
(e) Clear the DTCs.
Body Electrical > Wiper > Clear DTCs
|
|
2. |
CHECK FOR DTC |
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Wait 10 seconds or more.
(d) Turn the Techstream on.
(e) Enter the following menus: Body Electrical / Wiper / Trouble Codes.
(f) Check for DTCs.
Body Electrical > Wiper > Trouble Codes
|
Result |
Proceed to |
|---|---|
|
DTC B1370 is not output |
A |
|
DTC B1370 is output |
B |
| A |
|
USE SIMULATION METHOD TO CHECK
|
![2018 MY Camry [03/2017 - 06/2017]; INTRODUCTION: HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS: HOW TO PROCEED WITH TROUBLESHOOTING](/t3Portal/stylegraphics/info.gif)
| B |
|
|
|