| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM1000000012SBJ |
| Model Year Start: 2018 | Model: Camry | Prod Date Range: [03/2017 - 06/2017] |
| Title: AUDIO / VIDEO: RADIO RECEIVER: INSTALLATION; 2018 MY Camry [03/2017 - 06/2017] | ||
INSTALLATION
PROCEDURE
1. PRECAUTION
NOTICE:
-
When replacing the radio and display receiver assembly, always replace it with a new one. If a radio and display receiver assembly which was installed to another vehicle is used, the following may occurs:
- A communication malfunction DTC may be stored.
- The radio and display receiver assembly may not operate normally.
2. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY
3. INSTALL NO. 2 RADIO RECEIVER BRACKET
(a) Install the No. 2 radio receiver bracket with the 3 screws.
4. INSTALL NO. 1 RADIO RECEIVER BRACKET
(a) Install the No. 1 radio receiver bracket with the 3 screws.
5. INSTALL TELLTALE LIGHT ASSEMBLY (for 7 Inch Display)
Click here
![2018 - 2020 MY Camry [03/2017 - 10/2020]; THEFT DETERRENT / KEYLESS ENTRY: SECURITY INDICATOR LIGHT ASSEMBLY: INSTALLATION+](/t3Portal/stylegraphics/info.gif)
6. INSTALL MULTI-MEDIA MODULE WIRE (for 8 Inch Display)
(a) Engage the claw.
(b) Connect the connector to install the multi-media module wire.
7. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET (for 7 Inch Display)
(a) Connect each connector.
(b) Engage the 2 guides to temporarily install the radio and display receiver assembly with bracket as shown in the illustration.
|
Install in this Direction |
- |
- |
(c) Engage the 5 clips as shown in the illustration.
|
|
Install in this Direction |
- |
- |
(d) Engage the 4 clips in the order shown in the illustration.
|
|
Install in this Direction |
- |
- |
(e) Install the radio and display receiver assembly with bracket with the 4 bolts.
8. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET (for 8 Inch Display)
(a) Connect each connector.
(b) Engage the 2 guides to temporarily install the radio and display receiver assembly with bracket as shown in the illustration.
|
|
Install in this Direction |
- |
- |
(c) Engage the 7 clips as shown in the illustration.
|
|
Install in this Direction |
- |
- |
(d) Engage the 4 clips in the order shown in the illustration.
|
|
Install in this Direction |
- |
- |
(e) Install the radio and display receiver assembly with bracket with the 4 bolts.
9. INSTALL AIR CONDITIONING CONTROL ASSEMBLY (for 7 Inch Display)
Click here
10. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY
Click here
11. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY
Click here
12. INSTALL NO. 2 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY
Click here
13. INSTALL NO. 1 METER HOOD CLUSTER
Click here
|
|