Last Modified: 11-20-2023 |
6.11:8.1.0 |
Doc ID: RM1000000012SBG |
Model Year Start: 2018 |
Model: Camry |
Prod Date Range: [03/2017 -
] |
Title: AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM: Data Signal Circuit between Radio Receiver and Stereo Jack Adapter; 2018 - 2024 MY Camry [03/2017 - ] |
Data Signal Circuit between Radio Receiver and Stereo Jack Adapter
|
DESCRIPTION
The No. 1 stereo jack adapter assembly sends the sound data signal or image data signal from a USB device to the radio and display receiver assembly via this circuit.
WIRING DIAGRAM
PROCEDURE
1.
|
CHECK HARNESS AND CONNECTOR (RADIO AND DISPLAY RECEIVER ASSEMBLY - NO. 1 STEREO JACK ADAPTER ASSEMBLY)
|
(a) Disconnect the K135 radio and display receiver assembly connector.
(b) Disconnect the K5 No. 1 stereo jack adapter assembly connector.
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection
|
Condition
|
Specified Condition
|
K135-2 (US1-) - K5-9 (UDO-)
|
Always
|
Below 1 Ω
|
K135-3 (US1+) - K5-10 (UDO+)
|
Always
|
Below 1 Ω
|
K135-5 (USO1) - K5-12 (UJSS)
|
Always
|
Below 1 Ω
|
K135-2 (US1-) or K5-9 (UDO-) - Body ground
|
Always
|
10 kΩ or higher
|
K135-3 (US1+) or K5-10 (UDO+) - Body ground
|
Always
|
10 kΩ or higher
|
K135-5 (USO1) or K5-12 (UJSS) - Body ground
|
Always
|
10 kΩ or higher
|
|
|
*a
|
Front view of wire harness connector
(to Radio and Display Receiver Assembly)
|
*b
|
Front view of wire harness connector
(to No. 1 Stereo Jack Adapter Assembly)
|
|
|
NG |
|
REPAIR OR REPLACE HARNESS OR CONNECTOR
|
|