Last Modified: 11-20-2023 6.11:8.1.0 Doc ID: RM1000000012S7N
Model Year Start: 2018 Model: Camry Prod Date Range: [03/2017 - 10/2020]
Title: CRUISE CONTROL: FORWARD RECOGNITION CAMERA SYSTEM: HOW TO PROCEED WITH TROUBLESHOOTING; 2018 - 2020 MY Camry [03/2017 - 10/2020]

HOW TO PROCEED WITH TROUBLESHOOTING

CAUTION / NOTICE / HINT

HINT:

  • Use the following procedure to troubleshoot the forward recognition camera system.
  • *: Use the Techstream.

PROCEDURE

1.

VEHICLE BROUGHT TO WORKSHOP

NEXT

2.

INSPECT BATTERY VOLTAGE

(a) Measure the battery voltage.

Standard Voltage:

11 to 14 V

If the voltage is below 11 V, replace or recharge the battery before proceeding to the next step.

NEXT

3.

CHECK CAN COMMUNICATION SYSTEM*

(a) Using the Techstream, check if the CAN communication system is functioning normally.

HINT:

Refer to Communication Bus Check in CAN Communication System.

Click here 2018 MY Camry [03/2017 - 06/2017]; NETWORKING: CAN COMMUNICATION SYSTEM: DIAGNOSIS SYSTEM 2018 MY Camry [06/2017 - 08/2018]; NETWORKING: CAN COMMUNICATION SYSTEM: DIAGNOSIS SYSTEM 2019 MY Camry [08/2018 - 09/2019]; NETWORKING: CAN COMMUNICATION SYSTEM: DIAGNOSIS SYSTEM 2020 MY Camry [09/2019 - 03/2020]; NETWORKING: CAN COMMUNICATION SYSTEM: DIAGNOSIS SYSTEM 2020 MY Camry [03/2020 - 10/2020]; NETWORKING: CAN COMMUNICATION SYSTEM: DIAGNOSIS SYSTEM

OK:

CAN communication system is functioning normally.

NG

GO TO CAN COMMUNICATION SYSTEM

OK

4.

CHECK FOR DTCs* (FORWARD RECOGNITION CAMERA SYSTEM)

HINT:

Refer to DTC Check / Clear.

Click here 2018 - 2020 MY Camry [03/2017 - 10/2020]; CRUISE CONTROL: FORWARD RECOGNITION CAMERA SYSTEM: DTC CHECK / CLEAR

(a) Check for DTCs and note any codes that are output.

Chassis > Front Recognition Camera > Trouble Codes

(b) Clear the DTCs.

Chassis > Front Recognition Camera > Clear DTCs

(c) Recheck for DTCs. Try to reproduce the DTCs by duplicating the conditions indicated by the DTCs.

Chassis > Front Recognition Camera > Trouble Codes

Result

Proceed to

DTCs are not output

A

DTCs are output

B

B

GO TO DTC CHART 2018 MY Camry [03/2017 - 06/2017]; CRUISE CONTROL: FORWARD RECOGNITION CAMERA SYSTEM: DIAGNOSTIC TROUBLE CODE CHART 2018 - 2020 MY Camry [06/2017 - 10/2020]; CRUISE CONTROL: FORWARD RECOGNITION CAMERA SYSTEM: DIAGNOSTIC TROUBLE CODE CHART

A

5.

PROBLEM SYMPTOMS TABLE

HINT:

Refer to Problem Symptoms Table.

Click here 2018 - 2020 MY Camry [03/2017 - 10/2020]; CRUISE CONTROL: FORWARD RECOGNITION CAMERA SYSTEM: PROBLEM SYMPTOMS TABLE

Result

Proceed to

Fault is not listed in Problem Symptoms Table

A

Fault is listed in Problem Symptoms Table

B

B

GO TO STEP 7

A

6.

OVERALL ANALYSIS AND TROUBLESHOOTING*

(a) Terminals of ECU

Click here 2018 MY Camry [03/2017 - 08/2018]; CRUISE CONTROL: FORWARD RECOGNITION CAMERA SYSTEM: TERMINALS OF ECU 2019 - 2020 MY Camry [08/2018 - 10/2020]; CRUISE CONTROL: FORWARD RECOGNITION CAMERA SYSTEM: TERMINALS OF ECU

(b) Data List / Active Test

Click here 2018 - 2020 MY Camry [03/2017 - 10/2020]; CRUISE CONTROL: FORWARD RECOGNITION CAMERA SYSTEM: DATA LIST / ACTIVE TEST

NEXT

7.

ADJUST, REPAIR OR REPLACE

NOTICE:

If the forward recognition camera has been replaced with a new one, it is necessary to perform forward recognition camera adjustment.

Click here 2018 - 2020 MY Camry [03/2017 - 10/2020]; CRUISE CONTROL: FRONT CAMERA: ADJUSTMENT (SEQUENTIAL RECOGNITION)

NEXT

8.

CONFIRMATION TEST

NEXT

END