Last Modified: 11-20-2023 6.11:8.1.0 Doc ID: RM1000000012S6D
Model Year Start: 2018 Model: Camry Prod Date Range: [03/2017 -           ]
Title: BRAKE SYSTEM (OTHER): VACUUM PUMP (for A25A-FKS): REMOVAL; 2018 - 2024 MY Camry [03/2017 -        ]

REMOVAL

CAUTION / NOTICE / HINT

NOTICE:

This procedure includes the removal of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.

Click here 2018 MY Camry [03/2017 - 06/2017]; INTRODUCTION: REPAIR INSTRUCTION: PRECAUTION 2018 - 2019 MY Camry [06/2017 - 09/2019]; INTRODUCTION: REPAIR INSTRUCTION: PRECAUTION 2020 MY Camry [09/2019 - 03/2020]; INTRODUCTION: REPAIR INSTRUCTION: PRECAUTION 2020 - 2024 MY Camry [03/2020 -        ]; INTRODUCTION: REPAIR INSTRUCTION: PRECAUTION

PROCEDURE

1. DISCONNECT NO. 1 VACUUM HOSE CONNECTOR

(a) Pinch the retainer of the No. 1 vacuum hose connector, and then pull the No. 1 vacuum hose connector off of the vacuum pump assembly.

NOTICE:

Be sure to disconnect the No. 1 vacuum hose connector by hand.

*a

Retainer

Pinch

Pull off

2. SEPARATE ENGINE WIRE

(a) Disengage the 2 clamps to separate the engine wire.

3. REMOVE VACUUM PUMP ASSEMBLY

(a) Using an 8 mm socket wrench, remove the 3 bolts and vacuum pump assembly from the engine assembly.

(b) Remove the No. 1 vacuum pump O-ring from the vacuum pump assembly.