| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM1000000012S5C |
| Model Year Start: 2018 | Model: Camry | Prod Date Range: [03/2017 - ] |
| Title: BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: VSC OFF SWITCH: INSPECTION; 2018 - 2024 MY Camry [03/2017 - ] | ||
INSPECTION
PROCEDURE
1. INSPECT VSC OFF SWITCH
|
(a) Make sure that there is no looseness at the locking part and the connecting part of the connector. OK: The connector is securely connected. |
|
(b) Disconnect the VSC OFF switch connector.
(c) Check both the connector case and the terminal for deformation and corrosion.
OK:
No deformation or corrosion.
(d) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
|
Tester Connection |
Condition |
Specified Condition |
|---|---|---|
|
5 (+) - 2 (E) |
Switch pushed |
Below 1 Ω |
|
5 (+) - 2 (E) |
Switch not pushed |
10 kΩ or higher |
If the result is not as specified, replace the VSC OFF switch.
|
|