| Last Modified: 04-05-2023 | 6.11:8.1.0 | Doc ID: RM100000001DL6R |
| Model Year Start: 2019 | Model: Sienna | Prod Date Range: [08/2018 - ] |
| Title: DOOR LOCK: SLIDE DOOR LOCK: REMOVAL; 2019 - 2020 MY Sienna [08/2018 - ] | ||
REMOVAL
CAUTION / NOTICE / HINT
HINT:
- Use the same procedure for both the RH and LH sides.
- The procedure described below is for the RH side.
PROCEDURE
1. REMOVE REAR DOOR ARMREST BASE UPPER PANEL
Click here
![2019 - 2020 MY Sienna [08/2018 - ]; DOOR / HATCH: SLIDE DOOR: DISASSEMBLY+](/t3Portal/stylegraphics/info.gif)
2. REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY
Click here
3. REMOVE REAR DOOR GLASS WEATHERSTRIP INNER WITH GARNISH
Click here
4. REMOVE SLIDE DOOR HANDLE ASSEMBLY (w/o Power Slide Door)
|
(a) Disconnect the connector. |
|
(b) Remove the 3 bolts.
(c) Disengage the guide.
|
(d) Disengage the snap ring as shown in the illustration. |
|
(e) Disconnect the 4 cables to remove the slide door handle assembly.
5. REMOVE SLIDE DOOR HANDLE ASSEMBLY (w/ Power Slide Door)
|
(a) Disconnect the 2 connectors. |
|
(b) Remove the 3 bolts.
(c) Disengage the guide.
|
(d) Disengage the snap ring as shown in the illustration. |
|
(e) Disconnect the 5 cables to remove the slide door handle assembly.
6. REMOVE REAR DOOR SCUFF PLATE
Click here
7. REMOVE QUARTER TRIM COVER HOLE
Click here
8. REMOVE REAR DOOR WIRE (w/o Power Slide Door)
Click here
9. REMOVE REAR DOOR WIRE (w/ Power Slide Door)
Click here
10. REMOVE QUARTER WINDOW GLASS (w/ Power Slide Door)
Click here
11. REMOVE SLIDE RAIL END MOULDING (w/ Power Slide Door)
Click here
12. REMOVE POWER SLIDE DOOR MOTOR UNIT (w/ Power Slide Door)
Click here
13. REMOVE SLIDE DOOR SERVICE HOLE COVER
Click here
14. REMOVE REAR DOOR WINDOW FRAME REAR MOULDING
HINT:
Use the same procedure as for the LH side.
Click here
15. REMOVE REAR DOOR GLASS OUTER WEATHERSTRIP ASSEMBLY
HINT:
Use the same procedure as for the LH side.
Click here
16. REMOVE REAR DOOR GLASS RUN
Click here
17. REMOVE REAR DOOR BELT FRONT SEAL
Click here
18. REMOVE NO. 2 REAR DOOR GLASS RUN
Click here
19. REMOVE REAR DOOR GLASS SUB-ASSEMBLY
Click here
20. REMOVE REAR DOOR WINDOW REAR LOWER FRAME SUB-ASSEMBLY
Click here
21. REMOVE FRONT DOOR INSIDE LOCKING LINK PROTECTOR
Click here
22. REMOVE REAR DOOR INSIDE LOCKING LINK PROTECTOR
Click here
23. REMOVE SLIDE DOOR FRONT LOCK ASSEMBLY
|
(a) Disengage the clamp. |
|
(b) Disconnect the rod.
(c) Using a T30 "TORX" socket wrench, remove the 3 screws and slide door front lock assembly.
24. REMOVE SLIDE DOOR REAR LOCK ASSEMBLY (w/o Power Slide Door)
|
(a) Disengage the 2 clamps. |
|
(b) Using a T30 "TORX" socket wrench, remove the 3 screws and slide door rear lock assembly.
25. REMOVE POWER SLIDE DOOR LOCK ASSEMBLY (w/ Power Slide Door)
|
(a) Disengage the 2 clamps. |
|
(b) Remove the bolt.
(c) Using a T30 "TORX" socket wrench, remove the 3 screws and power slide door lock assembly.
|
|